92201-1E000 Fog Light for HYUNDAI Accent 2006 Left

92201-1E000 Fog Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 92201-1E000 is catalogued as a fog light for HYUNDAI Accent 2006, installed at the left front bumper position.

92201-1E000 — Purpose in the Lighting System

A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 92201-1E000 on the listed Accent, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU HY04002-044.

For SKU HY04002-044, state the destination, quantity and preferred packaging. Quoting 92201-1E000 with the HYUNDAI Accent 2006 and left position helps separate lighting-technology and model-year variants during packing.

HY04002-044 — OE Reference and Side Confirmation

Start with the full reference 92201-1E000; then verify that the listed side matches the vehicle. Item HY04002-044 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

92201-1E000 — Lens, Housing and Plug Review

Use the 92201-1E000 page photographs to inspect lens clarity and reflector geometry. For electrical compatibility on SKU HY04002-044, review the vehicle circuit if the existing lamp has intermittent output and confirm the plug reaches its locked position without modification.

HY04002-044 — Replacement Preparation

Before securing 92201-1E000, inspect damaged brackets before installing the replacement. After connecting SKU HY04002-044, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92201-1E000

Cross-reference numbers: 92201-1E000

Internal item code: HY04002-044

Vehicle brand: HYUNDAI

Vehicle model: Accent

Model year: 2006

Installation position: Front bumper

Installation side: Left

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92201-1E000, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU HY04002-044, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

How should 92201-1E000 be installed?

For item HY04002-044, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

What if the original number for 92201-1E000 is unreadable?

To compare SKU HY04002-044, send clear front, rear, connector and mounting-point photographs together with the HYUNDAI model, year and installation side.

Does 92201-1E000 include a bulb or control module?

The supply scope for 92201-1E000 follows the SKU HY04002-044 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

What information is useful for a wholesale quotation?

Provide 92201-1E000, SKU HY04002-044, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

How is the 92201-1E000 optical surface protected for shipping?

Packing for SKU HY04002-044 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.

Request a Product-Specific Quote

Send the complete OE reference 92201-1E000, internal number HY04002-044, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Match the lamp contour, body depth and adjuster arrangement before confirming the replacement.

Mounting comparison: Check the mounting tabs and hole positions for a direct fit without forcing the brackets.

Electrical connection: Confirm the connector shape, terminal count and locking tab match the vehicle harness.

Installation guidance: Inspect nearby brackets for damage, then verify clearance after the lamp is secured.

Quotation information: Quote the OE reference together with the vehicle, side and quantity to identify the correct version.