92201-05500 Fog Light for HYUNDAI Atos 2004 Left

92201-05500 Fog Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 92201-05500 is catalogued as a fog light for HYUNDAI Atos 2004, installed at the left front bumper position.

92201-05500 — Purpose in the Lighting System

A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 92201-05500 on the listed Atos, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU HY04002-007.

For SKU HY04002-007, request carton marking before a repeat export order. Quoting 92201-05500 with the HYUNDAI Atos 2004 and left position helps separate lighting-technology and model-year variants during packing.

HY04002-007 — OE Reference and Side Confirmation

Start with the full reference 92201-05500; then verify that the listed side matches the vehicle. Item HY04002-007 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

92201-05500 — Lens, Housing and Plug Review

Use the 92201-05500 page photographs to review the visible lens pattern and housing finish. For electrical compatibility on SKU HY04002-007, verify bulb specification before transferring reusable parts and confirm the plug reaches its locked position without modification.

HY04002-007 — Replacement Preparation

Before securing 92201-05500, inspect damaged brackets before installing the replacement. After connecting SKU HY04002-007, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 92201-05500

Cross-reference numbers: 92201-05500

Internal item code: HY04002-007

Vehicle brand: HYUNDAI

Vehicle model: Atos

Model year: 2004

Installation position: Front bumper

Installation side: Left

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 92201-05500, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU HY04002-007, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

Can model year alone confirm 92201-05500 fitment?

No. For SKU HY04002-007, vehicles built in the same year can use different lighting packages, so use 92201-05500 and the removed lamp geometry as the primary evidence.

Is 92201-05500 interchangeable between left and right sides?

No interchangeability should be assumed. The left housing, reflector orientation and brackets must correspond to the original bumper position.

How is the 92201-05500 optical surface protected for shipping?

Packing for SKU HY04002-007 should isolate the lens from pressure and support projecting tabs, connector areas and adjustment hardware inside the carton.

What information is useful for a wholesale quotation?

Provide 92201-05500, SKU HY04002-007, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Does 92201-05500 include a bulb or control module?

The supply scope for 92201-05500 follows the SKU HY04002-007 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

Request a Product-Specific Quote

Send the complete OE reference 92201-05500, internal number HY04002-007, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Check the visible lens profile, housing shape and rear clearance against the original unit.

Mounting comparison: Verify the bracket layout, locating points and fastener direction before installation.

Electrical connection: Check that the harness connector seats fully and uses the same terminal arrangement.

Installation guidance: Test the lighting function before completing bumper reassembly and final alignment.

Quotation information: Include the vehicle application, lamp side, OE number and quantity for accurate order matching.