92102-2S500 Head Light for HYUNDAI ix35 2013-2016 Right

Head Light Assembly Overview

The photographed assembly is supplied for buyers comparing a complete front lighting unit by vehicle application and physical construction. It is catalogued under OE reference 92102-2S500 for HYUNDAI ix35 2013-2016, with the right position identified in the source record.

The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.

Lighting Function and Optical Configuration

Validate that the beam system and external lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.

For the ix35 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use distinct internal modules, beam controls and daytime-light signatures.

Vehicle Fitment and Body Interface

Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.

Validate that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.

Connector and Control Hardware

Validate compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.

Validate the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.

Installation and Beam Alignment

After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.

A qualified workshop should examine surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.

Automotive Lighting Product Specifications

Product type: Head Light Assembly

Primary OE reference: 92102-2S500

Cross-reference numbers: 92102-2S500

Internal item code: HY04001-284

Vehicle brand: HYUNDAI

Vehicle model: ix35

Model year: 2013-2016

Installation position: Right front

Lighting configuration: base equipment version, China-market specification

Wholesale Supply and Protective Packing

Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.

When requesting a quotation, provide the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.

Application-Specific Comparison Notes

For this right HYUNDAI ix35 headlamp, the base equipment version, china-market specification specification should be assessed together with the 2013-2016 body application. Verify the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.

The right ix35 lighting package should remain the reference during electrical review. Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

When fitting the HYUNDAI ix35 unit at the right front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.

Frequently Asked Questions

What information supports a wholesale quotation?

State the HYUNDAI ix35 application, production year, right side, lighting version, quantity and delivery country.

Why must the rear housing be compared?

A similar lens can conceal a distinct casing depth, cap arrangement or bracket offset, preventing correct seating in the body opening.

How should the lamp be protected during shipping?

The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.

What photographs are useful for comparison?

Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.

Are left and right headlamps interchangeable?

No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.

Housing comparison: Use the original assembly to inspect the shell profile, upper support shape and clearance around nearby trim before installation.

Optical system: Confirm that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.

Electrical interface: Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.

Mounting points: Confirm that repaired body supports are square before judging lamp fit, because collision distortion can imitate a part mismatch.

Installation guidance: Use recommended workshop procedures for removal and refitting, then validate that vibration, panel pressure and cable routing do not stress the housing.

Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.

Application-specific focus: For the right HYUNDAI ix35 application with base equipment version, china-market specification, identify whether the original lighting system uses a reflector, projector, halogen bulb, xenon burner or integrated led light source.