92101-1Y500 Head Light for KIA Picanto 2014 Left

Head Light Assembly Overview

The listed unit is designed for the stated vehicle position and should be matched to the removed headlamp before installation. It is catalogued under OE reference 92101-1Y500 for KIA Picanto 2014, with the left position identified in the source record.

The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.

Lighting Function and Optical Configuration

Inspect reflector colour, projector presence and any decorative internal trim before approving a left/right pair for one vehicle.

For the Picanto application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use different internal modules, beam controls and daytime-light signatures.

Vehicle Fitment and Body Interface

Review the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.

Inspect mounting-ear spacing and support height against the removed lamp, including any hidden guide pin behind the bumper or grille edge.

Connector and Control Hardware

Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.

Confirm the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.

Installation and Beam Alignment

After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.

A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.

Automotive Lighting Product Specifications

Product type: Head Light Assembly

Primary OE reference: 92101-1Y500

Cross-reference numbers: 92101-1Y500

Internal item code: KA04001-091

Vehicle brand: KIA

Vehicle model: Picanto

Model year: 2014

Installation position: Left front

Lighting configuration: LED lighting

Wholesale Supply and Protective Packing

Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.

When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.

Application-Specific Comparison Notes

For this left KIA Picanto headlamp, the led lighting specification should be assessed together with the 2014 body application. Lay the replacement beside the removed unit and review overall depth, edge returns, vent locations and rear-cover clearance.

The left Picanto lighting package should remain the reference during electrical review. Confirm compatibility with the vehicle’s lighting controls, especially where automatic levelling or daytime-running-light functions are fitted.

When fitting the KIA Picanto unit at the left front position, preserve even body gaps and the intended beam orientation. Tighten the fasteners evenly, restore adjacent covers only after functional testing, and review bonnet and bumper clearances one final time.

Frequently Asked Questions

How can connector compatibility be reviewed?

Review keying, terminal count, latch direction and wire exit, then identify any required ballast, driver or levelling motor.

Can a headlamp be chosen by appearance alone?

No. The left lamp must also align with the optical system, electrical interface, mounting features and market specification.

What distinguishes adjacent lighting variants?

Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.

Are bulbs and electronic modules included?

The included components are those external in the product photographs. Review bulbs, caps, motors, ballasts and LED modules separately.

What should be checked before installation?

For the Picanto, review the vehicle supports, cross-check every fixing point, verify the connector and complete a no-force trial fit.

Electrical interface: Correspond to the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

Installation guidance: Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.

Wholesale packing: For wholesale supply, the lens should be isolated from carton pressure while the rear shell, adjusters and projecting mounting tabs are supported.

Application-specific focus: For the left KIA Picanto application with led lighting, review the low-beam and high-beam chambers, daytime-running-light strip and indicator section with the vehicle’s original configuration.