92101-0X140 Head Light for HYUNDAI i10 2011 Left

Head Light Assembly Overview

The headlamp shown should be chosen as a complete vehicle-specific assembly, with side and lighting version confirmed before ordering. It is catalogued under OE reference 92101-0X140 for HYUNDAI i10 2011, with the left position identified in the source record.

The external lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.

Lighting Function and Optical Configuration

Verify that the beam system and visible lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.

For the i10 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use non-matching internal modules, beam controls and daytime-light signatures.

Vehicle Fitment and Body Interface

Evaluate the rear housing depth, outer lens contour and the relationship between the grille-side and fender-side edges with the removed lamp.

Support projecting tabs during handling and verify that each locating feature enters the correct body-side slot during the dry fit.

Connector and Control Hardware

Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.

Verify the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.

Installation and Beam Alignment

Use appropriate workshop procedures for removal and refitting, then establish that vibration, panel pressure and cable routing do not stress the housing.

A qualified workshop should look over surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.

Automotive Lighting Product Specifications

Product type: Head Light Assembly

Primary OE reference: 92101-0X140

Cross-reference numbers: 92101-0X140

Internal item code: HY04001-301

Vehicle brand: HYUNDAI

Vehicle model: i10

Model year: 2011

Installation position: Left front

Lighting configuration: power-adjustment version

Wholesale Supply and Protective Packing

Left and right units should be labelled separately, and internal supports should keep the lamp from moving inside the export carton.

When requesting a quotation, supply the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.

Application-Specific Comparison Notes

For this left HYUNDAI i10 headlamp, the power-adjustment version specification should be assessed together with the 2011 body application. Verify that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.

The left i10 lighting package should remain the reference during electrical review. Do not use connector colour as the only selection point; terminal geometry, locking tabs and installed modules must also agree.

When fitting the HYUNDAI i10 unit at the left front position, preserve even body gaps and the intended beam orientation. Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.

Frequently Asked Questions

What photographs are useful for comparison?

Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.

What should be checked before installation?

For the i10, look over the vehicle supports, compare every fixing point, verify the connector and complete a no-force trial fit.

Can a headlamp be chosen by appearance alone?

No. The left lamp must also align with the optical system, electrical interface, mounting features and market specification.

Are left and right headlamps interchangeable?

No. This application requires the left side; bracket geometry, optical pattern and wiring position are side-specific.

What distinguishes adjacent lighting variants?

Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.

Housing comparison: Validate that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.

Optical system: Validate that the beam system and photographed lamp signature correspond to the vehicle trim rather than selecting by exterior outline alone.

Electrical interface: Agree with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

Mounting points: Shield projecting tabs during handling and verify that each locating feature enters the correct body-side slot during the dry fit.

Installation guidance: Complete a no-force trial fit first; once the panel gaps are even, secure the unit and adjust the beam to workshop specifications.

Wholesale packing: For repeat orders, retain the approved product photographs and application record so the same optical and mounting version is selected.

Application-specific focus: For the left HYUNDAI i10 application with power-adjustment version, examine the lens pattern, internal bezel finish and optical modules so the selected unit matches the intended lighting package.