8W6 807 682T T94 Fog Light Bezel for AUDI S5 2020 Right

8W6 807 682T T94 Fog Light Bezel Product Overview

This page helps workshops and wholesale buyers distinguish the lamp from nearby left/right and trim variants. 8W6 807 682T T94 is catalogued as a fog light bezel for AUDI S5 2020, installed at the right front bumper position.

8W6 807 682T T94 — Purpose in the Lighting System

The unit occupies a defined bumper opening, so housing depth and bracket geometry are as important as the lens shape. For 8W6 807 682T T94 on the listed S5, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU AD04002-016.

For SKU AD04002-016, list mixed left/right quantities separately. Quoting 8W6 807 682T T94 with the AUDI S5 2020 and right position helps separate lighting-technology and model-year variants during packing.

AD04002-016 — OE Reference and Side Confirmation

Start with the full reference 8W6 807 682T T94; then check whether the original unit uses a separate bulb holder. Item AD04002-016 should not be approved if its housing, bracket layout, right orientation or market specification differs from the removed fog light bezel.

8W6 807 682T T94 — Lens, Housing and Plug Review

Use the 8W6 807 682T T94 page photographs to compare the optical face and edge seal. For electrical compatibility on SKU AD04002-016, confirm the harness reaches the lamp without tension and confirm the plug reaches its locked position without modification.

AD04002-016 — Replacement Preparation

Before securing 8W6 807 682T T94, avoid touching a replacement bulb glass with bare fingers. After connecting SKU AD04002-016, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light Bezel

Primary OE reference: 8W6 807 682T T94

Cross-reference numbers: 8W6 807 682T T94

Internal item code: AD04002-016

Vehicle brand: AUDI

Vehicle model: S5

Model year: 2020

Installation position: Front bumper

Installation side: Right

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 8W6 807 682T T94, inner protection is arranged around the housing and connector so the optical surface does not carry the package load. For SKU AD04002-016, inner protection is arranged around the housing and connector so the optical surface does not carry the package load.

Frequently Asked Questions

What information is useful for a wholesale quotation?

Provide 8W6 807 682T T94, SKU AD04002-016, the vehicle application, mounting side, quantity, destination and photographs of the original lamp.

Can model year alone confirm 8W6 807 682T T94 fitment?

No. For SKU AD04002-016, vehicles built in the same year can use different lighting packages, so use 8W6 807 682T T94 and the removed lamp geometry as the primary evidence.

What should be checked on the connector for 8W6 807 682T T94?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the S5 application.

Does 8W6 807 682T T94 include a bulb or control module?

The supply scope for 8W6 807 682T T94 follows the SKU AD04002-016 photographs. Confirm bulbs, LED drivers, caps, brackets and wiring separately before ordering.

Is 8W6 807 682T T94 interchangeable between left and right sides?

No interchangeability should be assumed. The right housing, reflector orientation and brackets must correspond to the original bumper position.

Request a Product-Specific Quote

Send the complete OE reference 8W6 807 682T T94, internal number AD04002-016, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Check the visible lens profile, housing shape and rear clearance against the original unit.

Mounting comparison: Verify the bracket layout, locating points and fastener direction before installation.

Electrical connection: Check that the harness connector seats fully and uses the same terminal arrangement.

Installation guidance: Test the lighting function before completing bumper reassembly and final alignment.

Quotation information: Include the vehicle application, lamp side, OE number and quantity for accurate order matching.