8V0 941 774C Head Light for AUDI A3 2017 Right

Head Light Assembly Overview

This product record supports physical comparison of a front lamp assembly for workshop replacement and wholesale purchasing. It is catalogued under OE reference 8V0 941 774C for AUDI A3 2017, with the right position identified in the source record.

The visible lens, internal optical layout, rear casing and attachment points should be reviewed as one system. A close-looking lamp from another trim or market can differ behind the body opening.

Lighting Function and Optical Configuration

Verify the number and position of optical chambers and establish whether daytime lighting is integrated into the main housing.

For the A3 application, verify the lighting package fitted to the vehicle. Standard, projector, xenon and LED versions can use alternative internal modules, beam controls and daytime-light signatures.

Vehicle Fitment and Body Interface

Establish that the headlamp sits naturally in the body opening and follows the bonnet, grille and fender lines without forced alignment.

Review every upper, lower, inner and outer mounting tab for position and angle before paintwork or final installation.

Connector and Control Hardware

Align with the connector key, pin arrangement, latch direction and cable exit; LED or xenon versions may also require compatible control hardware.

Establish the supply scope shown in the product photographs. Bulbs, rear caps, levelling motors, ballasts, LED drivers and auxiliary brackets may vary between versions and should be checked separately.

Installation and Beam Alignment

Keep wiring clear of hot or moving components, then test low beam, high beam, indicator and daytime lighting where applicable.

A qualified workshop should review surrounding supports for damage, complete the electrical tests and set the headlamp beam according to local requirements after installation.

Automotive Lighting Product Specifications

Product type: Head Light Assembly

Primary OE reference: 8V0 941 774C

Cross-reference numbers: 8V0 941 774C

Internal item code: AD04001-004

Vehicle brand: AUDI

Vehicle model: A3

Model year: 2017

Installation position: Right front

Lighting configuration: Match the photographed optical configuration

Wholesale Supply and Protective Packing

Packing should distribute load around the housing rather than the lens and preserve dry, clean connector and module interfaces.

When requesting a quotation, include the vehicle application, production period, required side, lighting technology, quantity and destination. Original-lamp photographs are useful when several versions exist.

Application-Specific Comparison Notes

For this right AUDI A3 headlamp, the align with the photographed optical configuration specification should be assessed together with the 2017 body application. Lay the replacement beside the removed unit and evaluate overall depth, edge returns, vent locations and rear-cover clearance.

The right A3 lighting package should remain the reference during electrical review. Review terminal count, plug orientation and the location of removable caps before transferring bulbs or reusable electronics.

When fitting the AUDI A3 unit at the right front position, preserve even body gaps and the intended beam orientation. After the housing is secured, reconnect the lighting circuit, test every function and carry out professional beam aiming before road use.

Frequently Asked Questions

What distinguishes adjacent lighting variants?

Reflector, projector, xenon and LED versions can differ in modules, daytime-light layout, internal bezel and plug configuration.

What photographs are useful for comparison?

Clear front, rear, connector and mounting-tab views help distinguish the required headlamp from a similar-looking alternative.

When is professional beam aiming required?

Beam alignment should be checked after the unit is secured and every lighting function has been tested.

Are left and right headlamps interchangeable?

No. This application requires the right side; bracket geometry, optical pattern and wiring position are side-specific.

How should the lamp be protected during shipping?

The lens needs isolation from carton pressure, while the rear housing and projecting tabs require stable internal support.

Housing comparison: Review the inner and outer corners of the housing as well as the gap to adjacent panels; these points often separate nearby variants.

Optical system: Verify the number and position of optical chambers and validate whether daytime lighting is integrated into the main housing.

Wholesale packing: Carton protection should prevent abrasion on the lens and impact loading on brackets, caps, adjusters or exposed control modules.

Application-specific focus: For the right AUDI A3 application with agree with the photographed optical configuration, examine the lens pattern, internal bezel finish and optical modules so the chosen unit matches the intended lighting package.