8R0955275C Front Left Headlight Washer Nozzle Cover for AUDI Q5 2013

8R0955275C Front Left Headlight Washer Nozzle Cover Product Overview

The component shown under 8R0955275C is a front left headlight washer nozzle cover intended for AUDI Q5 2013. The visible cover closes the bumper opening around the washer unit and follows the surrounding bumper contour when the nozzle is retracted. Confirm the left orientation, washer-system connection, bumper-side geometry against the original vehicle part.

Fitment and Washer-System Application for Q5

Compatibility for 8R0955275C should be confirmed against AUDI Q5 2013 and the left installation side. The review should compare the hose connection or cover hinge with the original part, review painted, primed and unpainted finish requirements, and check whether the original cover is supplied separately from its support. Use the removed part and product photographs to compare the complete OE marking with the removed washer component, confirm the destination-market equipment specification, and verify that the OE reference is not for the opposite side; finally, confirm that the listed model designation matches the vehicle and use the full OE number, not a partial family reference.

Headlight Washer Nozzle Cover Function and Design Notes

The visible and hidden interfaces of AD02010-094 should be checked separately. For this headlight washer nozzle cover, check the complete supplied scope against the photographs, review the spring-loaded return features where fitted, and compare the support flange width. A direct comparison with the removed part should additionally inspect the molded tabs for cracks or distortion, check the fluid inlet for storage contamination, and review the engagement of the cover with the nozzle stem. Before the item is accepted, compare the visible bumper-side contour and inspect narrow plastic tips before installation.

OE Identification and Side Confirmation

8R0955275C is the primary OE identity for this left front left headlight washer nozzle cover, while AD02010-094 is the internal item code. Match both references to the vehicle record, then compare product photographs with the removed part from several angles. Do not substitute the mirrored side merely because the visible cover shape appears similar.

Installation and System Testing Guidance

Workshop preparation for AD02010-094 begins before the bumper area is disturbed: check the headlamp lens receives an even spray and avoid forcing a mirrored part into the bumper opening. During trial fitting, check the headlamp lens receives an even spray, avoid forcing a mirrored part into the bumper opening, and check the headlamp lens receives an even spray. Before returning the vehicle to service, avoid forcing a mirrored part into the bumper opening, check the headlamp lens receives an even spray, and avoid forcing a mirrored part into the bumper opening.

Receiving Inspection

When AD02010-094 arrives, receiving staff should compare connector depth and hose angle with the retained original part, photograph the received item if the vehicle fitment is still pending, and check the cap hinge or retaining point for free movement. Before workshop release, check the actuator body for straightness before trial installation, review the production finish against the approved sample, check the carton partition for evidence of part-to-part contact, and inspect the fluid passage only with clean, non-damaging tools. Complete the inspection by ensuring that staff match the item label to the purchase order and OE reference, confirm the nozzle outlet is clean and unobstructed, and verify the cover contour against the approved product photograph.

Product Technical Specifications

Product type: Front Left Headlight Washer Nozzle Cover

Primary OE reference: 8R0955275C

Cross-reference numbers: 8R0 955 275 C 8R0955275C

Internal item code: AD02010-094

Vehicle brand: AUDI

Vehicle model: Q5

Model year: 2013

Installation position: Front bumper / headlamp washer area

Side / orientation: Left

Applicable vehicle: AUDI Q5 2013

Wholesale Supply and Protective Packing

For a quotation or repeat order of 8R0955275C, please include the full OE reference on the purchase order, request a packing-list breakdown by internal item code, and identify project stock and service stock separately. Packing instructions should identify the required installation side, confirm sample approval before mass shipment, and request barcode or private-label details when needed. Before dispatch, confirm whether the visible cover needs a primed or finished surface and state any outer-carton marking requirements.

Frequently Asked Questions

How should 8R0955275C be packed for export?

The front left headlight washer nozzle cover should be wrapped separately, with visible faces, hose spigots, nozzle outlets and projecting tabs protected from compression and contamination. For item AD02010-094, the approval should identify project stock and service stock separately. The same item record should also include the full OE reference on the purchase order.

What information should accompany a 8R0955275C enquiry?

Send the complete OE number, vehicle model and year, installation side, original-part photographs, quantity and delivery destination. On the listed AUDI Q5 2013, technicians should use dividers to prevent caps from rubbing each other. A workshop comparison should additionally confirm sample approval before mass shipment.

Are clips, hoses or fasteners supplied with 8R0955275C?

The supply scope follows the product photographs. Reusable clips, hoses, seals, screws and separate brackets should be confirmed before the order is finalized. For the left-side order line, verify the packed quantity by OE reference. The order review should further use dividers to prevent caps from rubbing each other.

Which vehicle application is listed for 8R0955275C?

8R0955275C is listed for AUDI Q5 2013. Confirm the complete OE reference, model year, bumper specification and installation side against the vehicle. The product-specific check for 8R0955275C should compare product photographs with the removed part from several angles. Receiving staff should also compare the actuator orientation behind the bumper cover.

Is 8R0955275C a complete headlight washer system?

No. This listing covers the pictured headlight washer nozzle cover. The pump, reservoir, hoses, opposite-side parts and headlamp assembly are not included unless shown in the photographs. Before this headlight washer nozzle cover is accepted, identify project stock and service stock separately. Before approval, the buyer or technician should confirm the preferred incoterm.

Product function: Closes the bumper washer opening and restores the visible exterior contour around the headlamp.

Fitment check: Confirm the complete OE number, model year, bumper specification and left/right position before ordering.

Supply scope: The supplied components follow the product photographs; clips, hoses, seals and fasteners are included only when shown or separately confirmed.

Surface finish: Compare the visible colour and texture with the original part; painting may be required before final installation.

Quotation information: Send the OE number, vehicle model/year, required side, quantity and delivery destination for an application-specific quotation.