8R0 945 095B Rear Bumper Light for AUDI Q5 2010 Left

8R0 945 095B Rear Bumper Light Overview

This product is listed for AUDI Q5 2010 at the left rear-bumper position. The part occupies a vehicle-specific bumper opening and may function as a reflector, rear fog lamp or auxiliary marker.

Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.

On the 2010 Q5 bumper layout, confirm that any connector seal remains square when the housing is fully seated to verify that the photographed configuration matches the vehicle in the workshop.

Vehicle-Specific Selection

Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.

Compare both the visible surface and the rear attachment geometry to avoid selecting a cosmetic look-alike.

At the workshop selection stage for Q5, use the opposite-side component only as an alignment reference, not as an interchange part to avoid contact with wiring, body edges or hot exhaust components.

At the left rear-bumper position, compare the outer lens edge with the moulded bumper recess to keep the optical face level with the surrounding painted surface.

Passive Reflector or Lamp Configuration

If the original unit is powered, compare the socket, terminal count, cable exit and locking tab before installation.

Protect the exposed face from tools and fasteners while the bumper liner is open for access.

When reviewing the 2010 vehicle, inspect the lower valance and nearby exhaust trim for adequate operating clearance before any modification is made to the bumper or replacement part.

For the AUDI Q5 application, check the rear housing projection against the space behind the bumper skin before deciding whether original hardware is suitable for reuse.

Fitting Guidance and Testing

After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.

After installation, confirm the lens is level with nearby trim and that no retaining tab has backed out.

For this Q5 body configuration, compare the bumper corner radius with the product face from more than one viewing angle because facelift bumpers can retain the same vehicle name with different apertures.

Before approving the Q5 part for packing, align each locating tab with the matching slot before applying hand pressure so left- and right-hand stock cannot be mixed during consolidation.

Automotive Lighting Product Specifications

Product type: Rear Bumper Light

Primary OE reference: 8R0 945 095B

Cross-reference numbers: 8R0 945 095B

Internal item code: AD04004-049

Vehicle brand: AUDI

Vehicle model: Q5

Model year: 2010

Installation position: Rear bumper / reflector opening

Side / orientation: Left

Configuration: Match the photographed reflector or powered-lamp version

Wholesale Supply and Protective Packing

Confirm the required quantity and packaging method; exposed lens faces and projecting tabs need separate protection.

Before sealing the carton, compare the packed side and quantity with the buyer’s order line.

Before fitting the left unit, check whether the original component uses a separate retainer or an integral locking tab so the approved product can be picked consistently in a mixed wholesale order.

While the AUDI bumper opening is accessible, verify the fastener direction and the shape of the concealed support frame so hidden brackets are not loaded or bent during installation.

Frequently Asked Questions

Why can the same model year use another version?

Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.

Can appearance alone confirm compatibility?

No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.

What should be tested after fitting?

Check panel alignment and, for powered versions, verify the intended rear-lighting function before closing access panels.

Is this component illuminated or reflector-only?

Use the product photographs to confirm whether the rear body carries a connector, bulb holder or LED wiring.

What details help with a wholesale quote?

Provide vehicle, year, side, quantity, destination and clear photographs of the removed component.

Request a Product-Specific Quote

Destination and carton-marking requirements can be included with the vehicle-specific enquiry.

Housing match: Match the lens perimeter and rear support geometry rather than relying on colour or overall appearance alone.

Reflector or lamp role: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.

Selection context: Use the removed component as the physical reference for outer shape, housing projection and clip location.

Post-fit check: For reflector types, confirm correct orientation; for powered types, test the circuit before closing access panels.

Purchase information: Trade enquiries should include the vehicle year, model, bumper position and destination market for accurate picking.