8P0805608 Front Right Headlight Mounting Bracket for AUDI A3 2010-2013

8P0805608 Front Right Headlight Mounting Bracket Product Overview

The component shown under 8P0805608 is a front right headlight mounting bracket intended for AUDI A3 2010-2013. Confirm the right orientation, lamp-side contour, mounting geometry against the original vehicle part.

Fitment and Application for A3

Before sourcing this front right headlight mounting bracket, review regional specification differences, verify the left or right mounting side, and retain the original component for a direct comparison. At the workshop preparation stage, compare every locating point and screw opening, check the relationship with the lamp housing, and confirm the front installation position.

Before confirming this headlight accessory, review facelift and pre-facelift styling, confirm the destination-market version, and check the lamp manufacturer where multiple units were fitted. For a repeat wholesale purchase, check the relationship with the lamp housing, match the locator-slot arrangement, and confirm whether the vehicle uses a special appearance package.

For a body-shop order covering AUDI, check nearby body-panel interfaces, retain the original component for a direct comparison, and review headlamp shape changes between production phases. During the physical comparison, confirm the decorative finish or painted surface, verify the left or right mounting side, and compare the stamped or moulded reference.

Headlight Mounting Bracket Design and Replacement Notes

When separating nearby A3 variants, review the distance between fastening points, inspect both end geometries, and compare reusable clips and hardware. At the alignment stage, review the outer-edge shape, inspect the junction with the fender edge, and review the direction of the locating tabs.

When reviewing the visible finish on AD02009-002, compare the centre alignment point, compare surrounding grille openings, and check the transition to the bumper or grille. For a no-force trial fit, review the thickness around each mounting boss, review narrow tips for transport damage, and check the depth of the moulded locator channels.

Before sourcing this front right headlight mounting bracket, review narrow tips for transport damage, check the adjoining panel gap, and compare reusable clips and hardware. While checking adjacent body parts, measure the removed part where references are unclear, inspect the back-side support structure, and check the interface with the lamp housing.

Application-Specific Identification

A trim-level comparison requires with 8P0805608 on the A3 2010-2013: compare the installation direction. The AD02009-002 sample for the right side should check mirrored geometry against the required side. Before installation, check lamp-to-trim clearance; for a quotation, confirm whether clips are required separately.

A vehicle-side comparison starts with 8P0805608 on the A3 2010-2013: check nearby body-panel interfaces. The AD02009-002 sample for the right side should check the depth of the moulded locator channels. Before installation, avoid bending narrow moulded tabs; for a quotation, request protective inner wrapping.

Before workshop installation with 8P0805608 on the A3 2010-2013: confirm the destination-market version. The AD02009-002 sample for the right side should compare the visible texture and finish. Before installation, check the final perimeter around the lamp; for a quotation, request supported export-carton packing.

Installation Guidance

During left-versus-right inventory selection, compare the installed height with the opposite side, clean the lamp and bumper mounting area, and confirm the correct fitting direction. During receiving inspection, route nearby wiring away from sharp edges, protect painted and chrome surfaces, and review whether separate hardware is needed.

For replacement in the right front headlamp area, use hand pressure only during the initial engagement, protect exposed edges during removal, and photograph the completed installation for order records. When organizing mixed-OE inventory, inspect the surrounding guides, trial-fit the component without force, and compare the installed height with the opposite side.

When separating nearby A3 variants, ensure that all removed hardware is accounted for, transfer reusable clips carefully, and confirm the correct fitting direction. While reviewing the supplied photographs, confirm a consistent bumper gap, check that no locator is trapped behind the bumper, and reconfirm the OE reference after the trial fit.

Product Technical Specifications

Product type: Front Right Headlight Mounting Bracket

Primary OE reference: 8P0805608

Cross-reference numbers: 8P0805608

Internal item code: AD02009-002

Vehicle brand: AUDI

Vehicle model: A3

Model year: 2010-2013

Installation position: Front

Side / orientation: Right

Applicable vehicle: AUDI A3 2010-2013

Wholesale Supply and Packing

During an OE-led review for AD02009-002, include the complete OE reference, separate left and right items in the packing list, and state the required order quantity. During the physical comparison, state the destination port or city, check sample approval before mass shipment, and state estimated annual purchasing volume.

For wholesale selection of 8P0805608, retain the product and carton labels, review edge protection inside the carton, and check the ordered mounting side. When checking the headlamp opening, confirm the packing method, request protective inner wrapping, and specify whether the order is for service stock or a project.

During left-versus-right inventory selection, check the ordered mounting side, state whether left and right pairs should be bundled, and state the required order quantity. Before the carton is sealed, confirm whether clips are required separately, confirm barcode or private-label requirements, and agree the acceptable delivery window.

Frequently Asked Questions

How should 8P0805608 be packed for export?

The front right headlight mounting bracket should be supported inside the carton, with projecting tabs, narrow ends and visible surfaces protected against abrasion and compression. For A3, confirm the destination-market version; compare the profile below the lamp lens; review completed left-to-right alignment; and confirm the requested delivery schedule before fitting or quotation.

Is a sample order available for 8P0805608?

Sample and wholesale arrangements can be discussed after the OE reference, vehicle application, required side, quantity and destination are provided. For A3, compare every locating point and screw opening; inspect moulded corners before installation; inspect the lamp aim after surrounding parts are refitted; and request protective inner wrapping before fitting or quotation.

What information should be sent with a 8P0805608 enquiry?

Send the complete OE number, vehicle details, installation side, photographs of the original part, quantity and delivery destination. For A3, compare the stamped or moulded reference; compare surrounding grille openings; check the adjoining panel gaps; and separate left and right items in the packing list before fitting or quotation.

Should damaged vehicle-side mounts be checked before fitting 8P0805608?

Yes. Broken lamp tabs, distorted bumper guides or missing retainers can prevent correct alignment even when the replacement reference is correct. For A3, check the vehicle production date where available; review the outer-edge shape; confirm a consistent bumper gap; and identify mixed-OE orders clearly before fitting or quotation.

Can photographs alone confirm 8P0805608 compatibility?

Photographs are useful for visual comparison, but the OE reference, model year, side, trim level and mounting geometry should also match. For A3, verify that the grille design matches the stated application; compare mounting-hole height; check the finish for tool marks before delivery; and specify whether the order is for service stock or a project before fitting or quotation.

Request a Quote

Send the complete OE reference 8P0805608 , vehicle details, installation side, required quantity and delivery destination. AutoParts can review the application before preparing a product-specific export quotation.

Fitment reminder: 8P0805608: confirm the exact model year before placing the order; AD02009-002: compare the stamped or moulded reference; AUDI A3 2010-2013: match the locator-slot arrangement

Component review: AD02009-002: review the distance between fastening points; 8P0805608: compare surrounding grille openings; Right: check the interface with the lamp housing

Installation note: AUDI A3 2010-2013: check the final perimeter around the lamp; AD02009-002: check the adjoining panel gaps; 8P0805608: avoid bending narrow moulded tabs

Supply enquiry: 8P0805608: state estimated annual purchasing volume; AD02009-002: request protective inner wrapping; AUDI: request corner protection for long moulded parts