Key references

OE reference
8A61-A22404
Supplier SKU
FD02037-024
Vehicle application
2009 FORD Fiesta
Part type
Door Handles

Product specifications

OE reference8A61-A22404
Supplier SKUFD02037-024
Vehicle application2009 FORD Fiesta
Vehicle makeFORD
Vehicle modelFiesta
Production years2009
Installation positionRight-side exterior door position
Part typeDoor Handles
Cross-reference numbers8A61-A22404

Product details

Right Exterior Door Handle Application

OE 8A61-A22404 covers the right-side exterior door position application listed for 2009 FORD Fiesta. It is a dedicated right exterior door handle, not a universal replacement chosen by appearance.

Visible Profile and Component Identity

Photographs document right-hand curved lever with mirrored rear arm. Also note the silver exterior pull handle, then verify every concealed fastening feature against the removed component.

Product-Specific Selection Notes

This right-side lever mirrors the left Fiesta handle underneath even though both painted surfaces look alike. Use the direction of the operating arm and pivot hook for identification. Check that the lever retracts fully after each pull.

For 8A61-A22404, protect the visible silver exterior pull handle during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.

Before tightening FD02037-024, inspect the latch rod or cable end, pivot pin and return spring for wear. The handle should move the latch through its full travel without side-loading the carrier or scraping the surrounding panel.

If FD02037-024 feels loose after fitting, inspect the exterior carrier, latch rod engagement and door-skin mounting points before retightening 8A61-A22404. Excess force can crack the carrier while leaving the original linkage problem unresolved.

For bulk packing, place FD02037-024 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark right-side exterior door position on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.

Vehicle and Position Confirmation

Compare the pivot geometry, outer curve and linkage arm with the right-side removed handle. For 8A61-A22404, confirm 2009 production timing and the right-side exterior door position designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.

Automotive Replacement Part Specifications

Product type: Right Exterior Door Handle

Primary OE reference: 8A61-A22404

Internal item code: FD02037-024

Vehicle brand: FORD

Model: Fiesta

Vehicle year: 2009

Applicable vehicle: 2009 FORD Fiesta

Installation position: Right-side exterior door position

Surface appearance: Silver exterior pull handle

Cross-reference numbers: 8A61-A22404

Installation and Functional Check

Engage the front pivot, connect the rear arm and test latch release while the door trim remains accessible. Once 8A61-A22404 is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.

Receiving and Trade Supply

A trade enquiry for FD02037-024 should state 8A61-A22404, 2009 FORD Fiesta, right-side exterior door position, the required finish and order quantity. Receiving staff can identify this exact line by comparing right-hand curved lever with mirrored rear arm with the delivered item.

Frequently Asked Questions

What component is numbered 8A61-A22404?

The number refers here to a right exterior door handle for the stated FORD Fiesta application.

What needs comparing with the old part?

Match right-hand curved lever with mirrored rear arm, followed by every rear attachment and operating connection.

Can paint colour confirm fitment?

No. Surface colour alone does not prove that the carrier, lock feature or linkage is correct.

When is the functional test performed?

Perform a dry test before replacing all trim, then confirm normal return after final tightening.

How is FD02037-024 ordered in quantity?

Specify 8A61-A22404, the right-side exterior door position, finish, packing preference and shipment destination.

Visible identification: Right-hand curved lever with mirrored rear arm

Mounting review: Compare the pivot, clips, linkage or electrical connector shown in the saved product images.

Order information: Quote 8A61-A22404, SKU FD02037-024, right-side exterior door position and required quantity.

Wholesale note: State destination, packaging preference and whether matching left/right components are required.

Product classification

Body Parts

Vehicle systems

Body Parts

Body Parts. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Door Handles

Part categories

Door Handles

Door Handles. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.