8A61-A218A14-BD Exterior Door Handle Base with Keyhole for 2009 Ford Fiesta

Exterior Door Handle Base with Keyhole Application

Built around OE reference 8A61-A218A14-BD, this exterior door handle base with keyhole serves the exterior lock-side handle base of the 2009 FORD Fiesta. Selection depends on that exact location and the photographed attachment geometry.

Visible Profile and Component Identity

In the supplied views, long internal carrier with key-cylinder support and linkage features is the quickest visual identifier. Its black structural handle base should be judged together with the hidden carrier rather than as a colour-only match.

Product-Specific Selection Notes

This product is the structural base behind the visible handle rather than the cosmetic outer lever. The long carrier controls the pull movement and supports the key cylinder. Inspect every plastic guide for cracks, especially around the narrow lock-support section.

For 8A61-A218A14-BD, protect the visible black structural handle base during bench preparation. Avoid solvents that attack moulded plastic, and do not apply paint or adhesive to the lever pivot, switch membrane or retaining clips.

Before tightening FD02037-021, inspect the latch rod or cable end, pivot pin and return spring for wear. The handle should move the latch through its full travel without side-loading the carrier or scraping the surrounding panel.

If FD02037-021 feels loose after fitting, inspect the exterior carrier, latch rod engagement and door-skin mounting points before retightening 8A61-A218A14-BD. Excess force can crack the carrier while leaving the original linkage problem unresolved.

For bulk packing, place FD02037-021 in an individual sleeve with the visible face separated from fasteners and adjacent handles. Mark exterior lock-side handle base on the outer label so mirrored or different-door components remain distinguishable during warehouse picking.

Vehicle and Position Confirmation

Compare cylinder bracket, fastener points and lever track with the original exterior handle base. For 8A61-A218A14-BD, confirm 2009 production timing and the exterior lock-side handle base designation; the wrong neighbour part may reverse a pivot, cable seat, lock opening or connector.

Automotive Replacement Part Specifications

Product type: Exterior Door Handle Base with Keyhole

Primary OE reference: 8A61-A218A14-BD

Internal item code: FD02037-021

Vehicle brand: FORD

Model: Fiesta

Vehicle year: 2009

Applicable vehicle: 2009 FORD Fiesta

Installation position: Exterior lock-side handle base

Surface appearance: Black structural handle base

Cross-reference numbers: 8A61-A218A14-BD / 1574248

Installation and Functional Check

Transfer the lock components carefully, lubricate the moving track and test the exterior pull before closing the door. Once 8A61-A218A14-BD is seated, cycle the mechanism by hand, observe its return position and make sure nearby trim is not loaded or scratched.

Receiving and Trade Supply

A trade enquiry for FD02037-021 should state 8A61-A218A14-BD / 1574248, 2009 FORD Fiesta, exterior lock-side handle base, the required finish and order quantity. Receiving staff can identify this exact line by comparing long internal carrier with key-cylinder support and linkage features with the delivered item.

Frequently Asked Questions

Where is 8A61-A218A14-BD used?

8A61-A218A14-BD is listed at the exterior lock-side handle base of 2009 FORD Fiesta as a exterior door handle base with keyhole.

How is this exterior door handle base with keyhole recognised?

Look for long internal carrier with key-cylinder support and linkage features and compare the pictured black structural handle base.

Is the opposite side interchangeable?

Treat the opposite side as a separate part because its pivot, linkage and visible orientation may be mirrored.

What is checked after fitting 8A61-A218A14-BD?

Cycle the latch or switch, confirm free return and inspect the surrounding panel gap.

What should a buyer quote?

Send 8A61-A218A14-BD, internal code FD02037-021, the vehicle, position, finish, quantity and destination.

Visible identification: Long internal carrier with key-cylinder support and linkage features

Mounting review: Compare the pivot, clips, linkage or electrical connector shown in the saved product images.

Order information: Quote 8A61-A218A14-BD, SKU FD02037-021, exterior lock-side handle base and required quantity.

Wholesale note: State destination, packaging preference and whether matching left/right components are required.