8981654120 Blower Motor for ISUZU D-Max 2013

8981654120 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 8981654120 together with the 8981654120 product images and vehicle data on this page.

For catalogue item 6236-007, the 8981654120 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6236-007 when comparing this 8981654120 airflow configuration.

OE Reference and Application

The primary catalogue number is 8981654120 . The recorded application is ISUZU D-Max 2013. For 6236-007, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6236-007 with the approved OE reference.

HVAC Interface and 8981654120 installation

During work on 6236-007, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6236-007 before the lower trim is closed.

For item 6236-007, confirm that the 8981654120 centrifugal wheel clears its housing and that the 6236-007 connector lock engages without force. After seating 6236-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6236-007.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8981654120

Cross-reference numbers: 98165412 / C26A804100 / 10058C / DS676263 / CB657229 / CXA-2293 / 79307S6DG03 / 8973649790

Vehicle brand: ISUZU

Vehicle model: D-Max

Model year: 2013

8981654120 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6236-007, Packing preparation accounts for the 8981654120 motor weight and wheel shape to reduce movement inside the carton. The 6236-007 record remains the picking reference.

For trade item 6236-007, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6236-007 on the packing instruction.

Frequently Asked Questions

How should item 6236-007 and blower number 8981654120 be verified?

Match 6236-007 to the complete 8981654120 marking, then compare the 6236-007 plug, terminal count, mounting flange and wheel dimensions with the removed ISUZU unit.

Can 6236-007 have more than one vehicle-side blower configuration?

Yes. ISUZU production changes can affect 6236-007; confirm steering position, climate-control specification and the original 6236-007 geometry before approval.

What circuit checks are useful when 6236-007 does not operate?

For 6236-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6236-007 motor again.

Which details should accompany a wholesale request for 6236-007?

Provide item 6236-007, OE 8981654120, the stated application, quantity and destination; add 6236-007 carton or private-label requirements separately.

How can noise be avoided after fitting 6236-007?

Clear debris from the air inlet, check that the 6236-007 wheel turns freely, seat the 6236-007 flange evenly and keep wiring away from the impeller.

Request a quote for 6236-007: Send 8981654120, the 6236-007 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country