AutoParts

8940000260 Blower Motor for MAZDA

Blower Motor — 8940000260. MAZDA. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
8940000260
Supplier SKU
6206-029
Vehicle application
MAZDA
Part type
Blower Motor
Send an inquiry

Key references

OE reference
8940000260
Supplier SKU
6206-029
Vehicle application
MAZDA
Part type
Blower Motor

Product specifications

OE reference8940000260
Supplier SKU6206-029
Vehicle applicationMAZDA
Vehicle makeMAZDA
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbersB32L61B10 / 964674

Product details

8940000260 Automotive Blower Motor Overview

This listing links 8940000260 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6206-029, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6206-029 when comparing this 8940000260 airflow configuration.

OE Reference and Application

The primary catalogue number is 8940000260 . The recorded application is MAZDA. For 6206-029, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6206-029 with the approved OE reference.

HVAC Interface and 8940000260 installation

During work on 6206-029, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 8940000260 installation. Recheck 6206-029 before the lower trim is closed.

For item 6206-029, confirm that the 8940000260 centrifugal wheel clears its housing and that the 6206-029 connector lock engages without force. After seating 6206-029, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6206-029.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8940000260

Cross-reference numbers: B32L61B10 / 964674

Vehicle brand: MAZDA

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

8940000260 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6206-029, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6206-029 record remains the picking reference.

For trade item 6206-029, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6206-029 on the packing instruction.

Frequently Asked Questions

How should item 6206-029 and blower number 8940000260 be verified?

Match 6206-029 to the complete 8940000260 marking, then compare the 6206-029 plug, terminal count, mounting flange and wheel dimensions with the removed MAZDA unit.

Can 6206-029 have more than one vehicle-side blower configuration?

Yes. MAZDA production changes can affect 6206-029; confirm steering position, climate-control specification and the original 6206-029 geometry before approval.

What circuit checks are useful when 6206-029 does not operate?

For 6206-029, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6206-029 motor again.

Which details should accompany a wholesale request for 6206-029?

Provide item 6206-029, OE 8940000260, the stated application, quantity and destination; add 6206-029 carton or private-label requirements separately.

How can noise be avoided after fitting 6206-029?

Clear debris from the air inlet, check that the 6206-029 wheel turns freely, seat the 6206-029 flange evenly and keep wiring away from the impeller.

Request a quote for 6206-029: Send 8940000260, the 6206-029 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.