AutoParts
89023346 Blower Motor for CADILLAC Escalade
Blower Motor — 89023346. CADILLAC Escalade. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 89023346
- Supplier SKU
- 6208-074
- Vehicle application
- CADILLAC Escalade
- Part type
- Blower Motor
Key references
- OE reference
- 89023346
- Supplier SKU
- 6208-074
- Vehicle application
- CADILLAC Escalade
- Part type
- Blower Motor
Product specifications
| OE reference | 89023346 |
|---|---|
| Supplier SKU | 6208-074 |
| Vehicle application | CADILLAC Escalade |
| Vehicle make | CADILLAC |
| Vehicle model | Escalade |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 89023346 |
Product details
89023346 Automotive Blower Motor Overview
AutoParts catalogues 89023346 as an HVAC 89023346 airflow component for workshops, distributors and export buyers.
For catalogue item 6208-074, When the climate-control circuit commands 89023346 airflow, the electric motor rotates the 89023346 fan wheel inside the HVAC housing. Use 6208-074 when comparing this 89023346 airflow configuration.
OE Reference and Application
The primary catalogue number is 89023346 . The recorded application is CADILLAC Escalade. For 6208-074, Compare the OE label, plug key, terminal count, mounting flange and fan-wheel diameter with the removed CADILLAC unit. Record 6208-074 with the approved OE reference.
HVAC Interface and 89023346 installation
During work on 6208-074, If 89023346 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 89023346 motor is the only cause. Recheck 6208-074 before the lower trim is closed.
For item 6208-074, confirm that the 89023346 centrifugal wheel clears its housing and that the 6208-074 connector lock engages without force. After seating 6208-074, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-074.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 89023346
Cross-reference numbers: 89023346
Vehicle brand: CADILLAC
Vehicle model: Escalade
Model year: Confirm by OE reference
89023346 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6208-074, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6208-074 record remains the picking reference.
For trade item 6208-074, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6208-074 on the packing instruction.
Frequently Asked Questions
How should item 6208-074 and blower number 89023346 be verified?
Match 6208-074 to the complete 89023346 marking, then compare the 6208-074 plug, terminal count, mounting flange and wheel dimensions with the removed CADILLAC unit.
Can 6208-074 have more than one vehicle-side blower configuration?
Yes. CADILLAC production changes can affect 6208-074; confirm steering position, climate-control specification and the original 6208-074 geometry before approval.
What circuit checks are useful when 6208-074 does not operate?
For 6208-074, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-074 motor again.
Which details should accompany a wholesale request for 6208-074?
Provide item 6208-074, OE 89023346, the stated application, quantity and destination; add 6208-074 carton or private-label requirements separately.
How can noise be avoided after fitting 6208-074?
Clear debris from the air inlet, check that the 6208-074 wheel turns freely, seat the 6208-074 flange evenly and keep wiring away from the impeller.
Request a quote for 6208-074: Send 89023346, the 6208-074 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.
Installation guidance: Seat the mounting flange evenly, avoid impact to the plastic impeller, and listen for rubbing or imbalance during the first test.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.