89018521 Blower Motor for BUICK LeSabre

89018521 Automotive Blower Motor Overview

This listing links 89018521 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6208-025, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6208-025 when comparing this 89018521 airflow configuration.

OE Reference and Application

The primary catalogue number is 89018521 . The recorded application is BUICK LeSabre. For 6208-025, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6208-025 with the approved OE reference.

HVAC Interface and 89018521 installation

During work on 6208-025, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 89018521 installation. Recheck 6208-025 before the lower trim is closed.

For item 6208-025, confirm that the 89018521 centrifugal wheel clears its housing and that the 6208-025 connector lock engages without force. After seating 6208-025, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6208-025.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 89018521

Cross-reference numbers: TYC700110 / PM9218 / 15-80511 / BM.1009 / 75749 / GM3126126 / 2311595 / 2C2Z19805A / 3010479 / 700098 / 219456 / 2311706 / 3920 / 6552643

Vehicle brand: BUICK

Vehicle model: LeSabre

Model year: Confirm by OE reference

89018521 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6208-025, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6208-025 record remains the picking reference.

For trade item 6208-025, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6208-025 on the packing instruction.

Frequently Asked Questions

How should item 6208-025 and blower number 89018521 be verified?

Match 6208-025 to the complete 89018521 marking, then compare the 6208-025 plug, terminal count, mounting flange and wheel dimensions with the removed BUICK unit.

Can 6208-025 have more than one vehicle-side blower configuration?

Yes. BUICK production changes can affect 6208-025; confirm steering position, climate-control specification and the original 6208-025 geometry before approval.

What circuit checks are useful when 6208-025 does not operate?

For 6208-025, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6208-025 motor again.

Which details should accompany a wholesale request for 6208-025?

Provide item 6208-025, OE 89018521, the stated application, quantity and destination; add 6208-025 carton or private-label requirements separately.

How can noise be avoided after fitting 6208-025?

Clear debris from the air inlet, check that the 6208-025 wheel turns freely, seat the 6208-025 flange evenly and keep wiring away from the impeller.

Request a quote for 6208-025: Send 89018521, the 6208-025 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country