8710326060 Blower Motor for HONDA

8710326060 Automotive Blower Motor Overview

This listing links 8710326060 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6207-078, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6207-078 when comparing this 8710326060 airflow configuration.

OE Reference and Application

The primary catalogue number is 8710326060 . The recorded application is HONDA. For 6207-078, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6207-078 with the approved OE reference.

HVAC Interface and 8710326060 installation

During work on 6207-078, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 8710326060 installation. Recheck 6207-078 before the lower trim is closed.

For item 6207-078, confirm that the 8710326060 centrifugal wheel clears its housing and that the 6207-078 connector lock engages without force. After seating 6207-078, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-078.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8710326060

Cross-reference numbers: 871030K110 / 871030K070 / 79310TF0003

Vehicle brand: HONDA

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

8710326060 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-078, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-078 record remains the picking reference.

For trade item 6207-078, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6207-078 on the packing instruction.

Frequently Asked Questions

How should item 6207-078 and blower number 8710326060 be verified?

Match 6207-078 to the complete 8710326060 marking, then compare the 6207-078 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-078 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-078; confirm steering position, climate-control specification and the original 6207-078 geometry before approval.

What circuit checks are useful when 6207-078 does not operate?

For 6207-078, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-078 motor again.

Which details should accompany a wholesale request for 6207-078?

Provide item 6207-078, OE 8710326060, the stated application, quantity and destination; add 6207-078 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-078?

Clear debris from the air inlet, check that the 6207-078 wheel turns freely, seat the 6207-078 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-078: Send 8710326060, the 6207-078 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country