AutoParts

8710308050 Blower Motor for LEXUS RX330

Blower Motor — 8710308050. LEXUS RX330. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
8710308050
Supplier SKU
6228-006
Vehicle application
LEXUS RX330
Part type
Blower Motor
Send an inquiry

Key references

OE reference
8710308050
Supplier SKU
6228-006
Vehicle application
LEXUS RX330
Part type
Blower Motor

Product specifications

OE reference8710308050
Supplier SKU6228-006
Vehicle applicationLEXUS RX330
Vehicle makeLEXUS
Vehicle modelRX330
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers8710308051 / 8710308070 / 8710306030 / 8710306031 / 8710306040 / TO3126111 / PM9199

Product details

8710308050 Automotive Blower Motor Overview

Use 8710308050 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.

For catalogue item 6228-006, Cabin 8710308050 airflow depends on the 8710308050 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6228-006 when comparing this 8710308050 airflow configuration.

OE Reference and Application

The primary catalogue number is 8710308050 . The recorded application is LEXUS RX330. For 6228-006, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6228-006 with the approved OE reference.

HVAC Interface and 8710308050 installation

During work on 6228-006, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6228-006 before the lower trim is closed.

For item 6228-006, confirm that the 8710308050 centrifugal wheel clears its housing and that the 6228-006 connector lock engages without force. After seating 6228-006, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6228-006.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8710308050

Cross-reference numbers: 8710308051 / 8710308070 / 8710306030 / 8710306031 / 8710306040 / TO3126111 / PM9199

Vehicle brand: LEXUS

Vehicle model: RX330

Model year: Confirm by OE reference

8710308050 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6228-006, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6228-006 record remains the picking reference.

For trade item 6228-006, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6228-006 on the packing instruction.

Frequently Asked Questions

How should item 6228-006 and blower number 8710308050 be verified?

Match 6228-006 to the complete 8710308050 marking, then compare the 6228-006 plug, terminal count, mounting flange and wheel dimensions with the removed LEXUS unit.

Can 6228-006 have more than one vehicle-side blower configuration?

Yes. LEXUS production changes can affect 6228-006; confirm steering position, climate-control specification and the original 6228-006 geometry before approval.

What circuit checks are useful when 6228-006 does not operate?

For 6228-006, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6228-006 motor again.

Which details should accompany a wholesale request for 6228-006?

Provide item 6228-006, OE 8710308050, the stated application, quantity and destination; add 6228-006 carton or private-label requirements separately.

How can noise be avoided after fitting 6228-006?

Clear debris from the air inlet, check that the 6228-006 wheel turns freely, seat the 6228-006 flange evenly and keep wiring away from the impeller.

Request a quote for 6228-006: Send 8710308050, the 6228-006 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.