87103-60390 Blower Motor for TOYOTA Land Cruiser 2008-2011

87103-60390 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 87103-60390 together with the 87103-60390 product images and vehicle data on this page.

For catalogue item 6210-026, the 87103-60390 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-026 when comparing this 87103-60390 airflow configuration.

OE Reference and Application

The primary catalogue number is 87103-60390 . The recorded application is TOYOTA Land Cruiser 2008-2011. For 6210-026, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6210-026 with the approved OE reference.

HVAC Interface and 87103-60390 installation

During work on 6210-026, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-026 before the lower trim is closed.

For item 6210-026, confirm that the 87103-60390 centrifugal wheel clears its housing and that the 6210-026 connector lock engages without force. After seating 6210-026, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-026.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 87103-60390

Cross-reference numbers: 87103-60390

Vehicle brand: TOYOTA

Vehicle model: Land Cruiser

Model year: 2008-2011

87103-60390 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-026, Packing preparation accounts for the 87103-60390 motor weight and wheel shape to reduce movement inside the carton. The 6210-026 record remains the picking reference.

For trade item 6210-026, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6210-026 on the packing instruction.

Frequently Asked Questions

How should item 6210-026 and blower number 87103-60390 be verified?

Match 6210-026 to the complete 87103-60390 marking, then compare the 6210-026 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.

Can 6210-026 have more than one vehicle-side blower configuration?

Yes. TOYOTA production changes can affect 6210-026; confirm steering position, climate-control specification and the original 6210-026 geometry before approval.

What circuit checks are useful when 6210-026 does not operate?

For 6210-026, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-026 motor again.

Which details should accompany a wholesale request for 6210-026?

Provide item 6210-026, OE 87103-60390, the stated application, quantity and destination; add 6210-026 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-026?

Clear debris from the air inlet, check that the 6210-026 wheel turns freely, seat the 6210-026 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-026: Send 87103-60390, the 6210-026 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country