87103-60330 Blower Motor for TOYOTA Prado 2007-2009

87103-60330 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 87103-60330 to support OE-number comparison before purchase.

For catalogue item 6210-014, Cabin 87103-60330 airflow depends on the 87103-60330 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6210-014 when comparing this 87103-60330 airflow configuration.

OE Reference and Application

The primary catalogue number is 87103-60330 . The recorded application is TOYOTA Prado 2007-2009. For 6210-014, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6210-014 with the approved OE reference.

HVAC Interface and 87103-60330 installation

During work on 6210-014, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6210-014 before the lower trim is closed.

For item 6210-014, confirm that the 87103-60330 centrifugal wheel clears its housing and that the 6210-014 connector lock engages without force. After seating 6210-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-014.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 87103-60330

Cross-reference numbers: 87103-35100 / 5191345

Vehicle brand: TOYOTA

Vehicle model: Prado

Model year: 2007-2009

87103-60330 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-014, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-014 record remains the picking reference.

For trade item 6210-014, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-014 on the packing instruction.

Frequently Asked Questions

How should item 6210-014 and blower number 87103-60330 be verified?

Match 6210-014 to the complete 87103-60330 marking, then compare the 6210-014 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.

Can 6210-014 have more than one vehicle-side blower configuration?

Yes. TOYOTA production changes can affect 6210-014; confirm steering position, climate-control specification and the original 6210-014 geometry before approval.

What circuit checks are useful when 6210-014 does not operate?

For 6210-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-014 motor again.

Which details should accompany a wholesale request for 6210-014?

Provide item 6210-014, OE 87103-60330, the stated application, quantity and destination; add 6210-014 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-014?

Clear debris from the air inlet, check that the 6210-014 wheel turns freely, seat the 6210-014 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-014: Send 87103-60330, the 6210-014 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country