87103-52140A Blower Motor for TOYOTA Yaris 2008-2014

87103-52140A Automotive Blower Motor Overview

The 87103-52140A record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6210-017, When the climate-control circuit commands 87103-52140A airflow, the electric motor rotates the 87103-52140A fan wheel inside the HVAC housing. Use 6210-017 when comparing this 87103-52140A airflow configuration.

OE Reference and Application

The primary catalogue number is 87103-52140A . The recorded application is TOYOTA Yaris 2008-2014. For 6210-017, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6210-017 with the approved OE reference.

HVAC Interface and 87103-52140A installation

During work on 6210-017, If 87103-52140A airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 87103-52140A motor is the only cause. Recheck 6210-017 before the lower trim is closed.

For item 6210-017, confirm that the 87103-52140A centrifugal wheel clears its housing and that the 6210-017 connector lock engages without force. After seating 6210-017, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-017.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 87103-52140A

Cross-reference numbers: 87103-0D100

Vehicle brand: TOYOTA

Vehicle model: Yaris

Model year: 2008-2014

87103-52140A installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-017, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-017 record remains the picking reference.

For trade item 6210-017, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6210-017 on the packing instruction.

Frequently Asked Questions

How should item 6210-017 and blower number 87103-52140A be verified?

Match 6210-017 to the complete 87103-52140A marking, then compare the 6210-017 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.

Can 6210-017 have more than one vehicle-side blower configuration?

Yes. TOYOTA production changes can affect 6210-017; confirm steering position, climate-control specification and the original 6210-017 geometry before approval.

What circuit checks are useful when 6210-017 does not operate?

For 6210-017, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-017 motor again.

Which details should accompany a wholesale request for 6210-017?

Provide item 6210-017, OE 87103-52140A, the stated application, quantity and destination; add 6210-017 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-017?

Clear debris from the air inlet, check that the 6210-017 wheel turns freely, seat the 6210-017 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-017: Send 87103-52140A, the 6210-017 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country