87103-30390 Blower Motor for LEXUS GS 300

87103-30390 Automotive Blower Motor Overview

Reference 87103-30390 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6228-003, the 87103-30390 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6228-003 when comparing this 87103-30390 airflow configuration.

OE Reference and Application

The primary catalogue number is 87103-30390 . The recorded application is LEXUS GS 300. For 6228-003, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6228-003 with the approved OE reference.

HVAC Interface and 87103-30390 installation

During work on 6228-003, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6228-003 before the lower trim is closed.

For item 6228-003, confirm that the 87103-30390 centrifugal wheel clears its housing and that the 6228-003 connector lock engages without force. After seating 6228-003, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6228-003.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 87103-30390

Cross-reference numbers: 87103-30370 / 194000-7182 / 8710348020 / TO3126115

Vehicle brand: LEXUS

Vehicle model: GS 300

Model year: Confirm by OE reference

87103-30390 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6228-003, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6228-003 record remains the picking reference.

For trade item 6228-003, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6228-003 on the packing instruction.

Frequently Asked Questions

How should item 6228-003 and blower number 87103-30390 be verified?

Match 6228-003 to the complete 87103-30390 marking, then compare the 6228-003 plug, terminal count, mounting flange and wheel dimensions with the removed LEXUS unit.

Can 6228-003 have more than one vehicle-side blower configuration?

Yes. LEXUS production changes can affect 6228-003; confirm steering position, climate-control specification and the original 6228-003 geometry before approval.

What circuit checks are useful when 6228-003 does not operate?

For 6228-003, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6228-003 motor again.

Which details should accompany a wholesale request for 6228-003?

Provide item 6228-003, OE 87103-30390, the stated application, quantity and destination; add 6228-003 carton or private-label requirements separately.

How can noise be avoided after fitting 6228-003?

Clear debris from the air inlet, check that the 6228-003 wheel turns freely, seat the 6228-003 flange evenly and keep wiring away from the impeller.

Request a quote for 6228-003: Send 87103-30390, the 6228-003 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country