87103-0K200 Blower Motor for TOYOTA Hilux

87103-0K200 Automotive Blower Motor Overview

This listing links 87103-0K200 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6210-023, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6210-023 when comparing this 87103-0K200 airflow configuration.

OE Reference and Application

The primary catalogue number is 87103-0K200 . The recorded application is TOYOTA Hilux. For 6210-023, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6210-023 with the approved OE reference.

HVAC Interface and 87103-0K200 installation

During work on 6210-023, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 87103-0K200 installation. Recheck 6210-023 before the lower trim is closed.

For item 6210-023, confirm that the 87103-0K200 centrifugal wheel clears its housing and that the 6210-023 connector lock engages without force. After seating 6210-023, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-023.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 87103-0K200

Cross-reference numbers: 87103-26070 / 87103-0K060 / 87103-26081 / 87103-26072 / 272700-0720

Vehicle brand: TOYOTA

Vehicle model: Hilux

Model year: Confirm by OE reference

87103-0K200 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-023, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6210-023 record remains the picking reference.

For trade item 6210-023, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6210-023 on the packing instruction.

Frequently Asked Questions

How should item 6210-023 and blower number 87103-0K200 be verified?

Match 6210-023 to the complete 87103-0K200 marking, then compare the 6210-023 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.

Can 6210-023 have more than one vehicle-side blower configuration?

Yes. TOYOTA production changes can affect 6210-023; confirm steering position, climate-control specification and the original 6210-023 geometry before approval.

What circuit checks are useful when 6210-023 does not operate?

For 6210-023, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-023 motor again.

Which details should accompany a wholesale request for 6210-023?

Provide item 6210-023, OE 87103-0K200, the stated application, quantity and destination; add 6210-023 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-023?

Clear debris from the air inlet, check that the 6210-023 wheel turns freely, seat the 6210-023 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-023: Send 87103-0K200, the 6210-023 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country