AutoParts

87103-0C061 Blower Motor for TOYOTA Sienna

Blower Motor — 87103-0C061. TOYOTA Sienna. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
87103-0C061
Supplier SKU
6210-069
Vehicle application
TOYOTA Sienna
Part type
Blower Motor
Send an inquiry

Key references

OE reference
87103-0C061
Supplier SKU
6210-069
Vehicle application
TOYOTA Sienna
Part type
Blower Motor

Product specifications

OE reference87103-0C061
Supplier SKU6210-069
Vehicle applicationTOYOTA Sienna
Vehicle makeTOYOTA
Vehicle modelSienna
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers87103-28111 / 87103-0E070

Product details

87103-0C061 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 87103-0C061 together with the 87103-0C061 product images and vehicle data on this page.

For catalogue item 6210-069, the 87103-0C061 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6210-069 when comparing this 87103-0C061 airflow configuration.

OE Reference and Application

The primary catalogue number is 87103-0C061 . The recorded application is TOYOTA Sienna. For 6210-069, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6210-069 with the approved OE reference.

HVAC Interface and 87103-0C061 installation

During work on 6210-069, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6210-069 before the lower trim is closed.

For item 6210-069, confirm that the 87103-0C061 centrifugal wheel clears its housing and that the 6210-069 connector lock engages without force. After seating 6210-069, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6210-069.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 87103-0C061

Cross-reference numbers: 87103-28111 / 87103-0E070

Vehicle brand: TOYOTA

Vehicle model: Sienna

Model year: Confirm by OE reference

87103-0C061 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6210-069, Packing preparation accounts for the 87103-0C061 motor weight and wheel shape to reduce movement inside the carton. The 6210-069 record remains the picking reference.

For trade item 6210-069, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6210-069 on the packing instruction.

Frequently Asked Questions

How should item 6210-069 and blower number 87103-0C061 be verified?

Match 6210-069 to the complete 87103-0C061 marking, then compare the 6210-069 plug, terminal count, mounting flange and wheel dimensions with the removed TOYOTA unit.

Can 6210-069 have more than one vehicle-side blower configuration?

Yes. TOYOTA production changes can affect 6210-069; confirm steering position, climate-control specification and the original 6210-069 geometry before approval.

What circuit checks are useful when 6210-069 does not operate?

For 6210-069, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6210-069 motor again.

Which details should accompany a wholesale request for 6210-069?

Provide item 6210-069, OE 87103-0C061, the stated application, quantity and destination; add 6210-069 carton or private-label requirements separately.

How can noise be avoided after fitting 6210-069?

Clear debris from the air inlet, check that the 6210-069 wheel turns freely, seat the 6210-069 flange evenly and keep wiring away from the impeller.

Request a quote for 6210-069: Send 87103-0C061, the 6210-069 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.