86832-3S000 Front Right Mudguard for HYUNDAI Sonata 2011-2013

86832-3S000 Front Right Mudguard Product Overview

The component below is organised for body-parts buyers sourcing HYUNDAI Sonata 2011-2013. It limits tyre-thrown spray and grit around the front wheel opening while helping protect the rocker and lower-fender area. Check handedness carefully before removing protective packaging from the supplied part.

Road-Water Management at the Lower Body

Inspect the wheel-side texture, outer face and attachment pattern on 86832-3S000 for the front right wheel-arch splash protection position, because a similar photograph does not prove identical fastening geometry.

Vehicle and OE Fitment Confirmation

Verify the axle and left-right orientation on the vehicle for HYUNDAI Sonata 2011-2013 and the source application "11-13款 索纳塔 挡泥板 前右". The purchase order should state one side, a pair or the required quantity clearly.

Product Technical Specifications

Product type: Front Right Mudguard

Primary OE reference: 86832-3S000

Internal item code: HY02017-024

Vehicle brand: HYUNDAI

Model: Sonata

Vehicle year: 2011-2013

Installation position: Front Right wheel-arch splash protection position

Applicable vehicle: HYUNDAI Sonata 2011-2013

Cross-reference numbers: 86832-3S000

Bench Comparison and Final Position Check

Compare the reverse face with the retained original mudguard when 86832-3S000 arrives under item code HY02017-024. Incoming inspection provides a practical checkpoint before labour is scheduled.

Wholesale Ordering Information

Attach the original-part label if the moulded number is difficult to read when requesting 86832-3S000 for HYUNDAI Sonata 2011-2013. The requested supply scope should distinguish the guard from adjacent trim.

Frequently Asked Questions

How can I confirm 86832-3S000 matches my vehicle?

Confirm the OE number, axle, side, production year and mounting layout against the removed part before ordering.

Which physical details should be compared on 86832-3S000?

Set the old and new parts together to check height, width and curvature. so the final edge profile follows the vehicle bodywork cleanly.

What is included with the 86832-3S000 mudguard supply?

This wholesale line contains the illustrated wheel-splash component, without assuming the inclusion of used fasteners from the vehicle.

What should be checked when 86832-3S000 is delivered?

Inspect the arch curve under neutral temperature before trial fitting. Carton and product identities must stay linked during distributor receiving.

What information is needed to quote 86832-3S000?

Attach the original-part label if the moulded number is difficult to read for HY02017-024. Stated delivery expectations help purchasing and production schedules align.

Fitment confirmation: Match the body style where different arches share the same model name for 86832-3S000; The exact wheel location matters because opposite guards are normally not interchangeable.

Physical comparison: Review the embossed features and support surfaces on the reverse side; to support a practical fitment decision before bulk quantities are released.

Supply scope: Supply is for the documented mud flap at the stated wheel position, with consolidated packing available for approved quantities.

Receiving focus: Inspect the arch curve under neutral temperature before trial fitting for HY02017-024; The removed part should remain available for a direct bench comparison.

Purchase preparation: Use both the OE number and YoonShan item code in correspondence; The internal SKU improves traceability across repeat purchasing cycles.