86832-0X000 Front Right Mudguard for HYUNDAI i10 2007

86832-0X000 Front Right Mudguard Product Overview

This body-protection item is specified against HYUNDAI i10 2007. It limits tyre-thrown spray and grit around the front wheel opening while helping protect the rocker and lower-fender area. Part orientation and arch contour must be checked independently of the vehicle badge.

OE Identity and Wheel-Position Matching

Compare the body-contact edge, clip seats and screw locations on 86832-0X000 for the front right wheel-arch splash protection position, to keep the splash lip in the intended airflow and debris path.

Vehicle and OE Fitment Confirmation

Match the internal SKU to the OE number on the purchase line for HYUNDAI i10 2007 and the source application "07款 I10 挡泥板 前右". Market-specific body trim can affect the final edge alignment.

Product Technical Specifications

Product type: Front Right Mudguard

Primary OE reference: 86832-0X000

Internal item code: HY02017-040

Vehicle brand: HYUNDAI

Model: i10

Vehicle year: 2007

Installation position: Front Right wheel-arch splash protection position

Applicable vehicle: HYUNDAI i10 2007

Cross-reference numbers: 86832-0X000

Mounting-Surface Cleaning and Alignment

Lay the guard on a flat protected surface and review its moulded shape when 86832-0X000 arrives under item code HY02017-040. Minor storage deformation should not be forced against the vehicle with screws.

Wholesale Ordering Information

Include a clear photo of the removed guard and its mounting face when requesting 86832-0X000 for HYUNDAI i10 2007. Packaging instructions can be matched to the product’s flexible moulded shape.

Frequently Asked Questions

How can I confirm 86832-0X000 matches my vehicle?

Confirm the OE number, axle, side, production year and mounting layout against the removed part before ordering.

Which physical details should be compared on 86832-0X000?

Inspect whether the guard follows the same wheel-opening radius. to identify transit distortion before workshop installation begins.

What is included with the 86832-0X000 mudguard supply?

The shipped part is the OE-referenced guard shown in the product photos; any supplementary brackets require written confirmation.

What should be checked when 86832-0X000 is delivered?

Check whether any fastener locations require replacement clips. Quantity control is especially important when front and rear guards are ordered together.

What information is needed to quote 86832-0X000?

Confirm whether clips or screws must be quoted separately for HY02017-040. Clear wheel-position wording prevents left-right assumptions during packing.

Fitment confirmation: Use the old part, OE reference and vehicle data together for 86832-0X000; Receiving teams can then match cartons to repair jobs more reliably.

Physical comparison: Compare the flange depth and the distance between end fasteners; to separate this mudguard from nearby liner and deflector components.

Receiving focus: Review packaging condition before accepting a visibly distorted part for HY02017-040; A photo record can speed communication when a supply discrepancy is found.

Purchase preparation: Confirm the approved image set before finalising the purchase order; Separate hardware requirements should be known before landed cost is compared.