86631-2S000 Bumper Reinforcement for HYUNDAI Tucson 2010-2015 Rear

86631-2S000 Bumper Reinforcement Overview

This 86631-2S000 listing covers the rear bumper reinforcement for HYUNDAI Tucson 2010-2015. Its photographed mounting form identifies the supplied version.

Vehicle production changes may alter beam section, for 86631-2S000 support plates or mounting holes even when the model name is unchanged.

Vehicle Interface Overview

Check whether the beam ends step upward for 86631-2S000 or downward and confirm the bracket faces align without preload.

Confirm 86631-2S000 against the production period and rear bumper location. Similar covers on HYUNDAI Tucson 2010-2015 can conceal different support sections.

Reinforcement Profile and Fasteners

This replacement part is catalogued by OE for 86631-2S000 reference, vehicle generation and front/rear location rather than appearance alone.

Measure the principal mounting-hole spacing and inspect for 86631-2S000 any welded studs, captive nuts or locator slots.

Replacement Planning

Dry-fit the replacement with every bolt started for 86631-2S000 by hand, then check fascia and under-panel clearance before final tightening.

Before installing 86631-2S000, a qualified repair professional should assess collision distortion at the HYUNDAI Tucson 2010-2015 mounting faces.

Automotive Component Specifications

Product type: Bumper Reinforcement

Primary OE reference: 86631-2S000

Cross-reference numbers: 86631-2S000

Internal item code: HY03004-037

Vehicle brand: HYUNDAI

Vehicle model: Tucson

Model year: 2010-2015

Installation position: Rear bumper

Trade Ordering Notes

Sampling should be approved against OE reference, for 86631-2S000 mounting geometry and front/rear position before bulk release.

Frequently Asked Questions

How is 86631-2S000 fitment verified?

Confirm 86631-2S000 against HYUNDAI Tucson 2010-2015, the rear position and the complete mounting geometry shown in the product photo.

Which physical points should be compared?

Check the outer mounting plates, central section for 86631-2S000 profile and distance between chassis-side attachment points.

Is 86631-2S000 a universal bumper component?

No. The 86631-2S000 span, absorber profile, brackets and mounting points are specific to HYUNDAI Tucson 2010-2015.

What preparation is recommended for 86631-2S000?

Check that no bracket is distorted and for 86631-2S000 that all mounting faces contact evenly without forcing the component into position.

Which details support a 86631-2S000 trade quotation?

Where two references are shown, confirm which for 86631-2S000 number appears on the removed vehicle part before order approval.

Need a quotation for 86631-2S000? Contact AutoParts with vehicle, bumper position, quantity and destination.

Physical comparison: Review the photographed beam profile together with for 86631-2S000 the vehicle-side rail spacing rather than selecting by length alone.

Component design: This application-specific part must match the body-side for 86631-2S000 interface as well as the bumper package installed on the vehicle.

Installation guidance: Keep wiring, parking-sensor looms and air guides for 86631-2S000 clear while bringing the beam into the vehicle-side mounting position.

Wholesale enquiry: For consolidated export orders, list each application for 86631-2S000 separately and confirm packing protection for projecting brackets.