81910-06080 Rear Bumper Light for TOYOTA Camry 2018 Right

81910-06080 Rear Bumper Light Overview

This product is listed for TOYOTA Camry 2018 at the right rear-bumper position. Function and fit are linked: the correct optical face must also align with the bumper surface and surrounding trim.

Production date and regional bumper specification should be reviewed when several near-identical versions are available.

While the TOYOTA bumper opening is accessible, confirm that the cable exit, where fitted, clears the bumper reinforcement to keep the optical face level with the surrounding painted surface.

Physical Fitment Evidence

Check the bumper recess, outer contour and clip orientation; similar reflectors can use different hidden mounts.

Check whether the bumper carries a plain reflector or an illuminated unit before approving the replacement.

During comparison of the TOYOTA rear component, confirm that any connector seal remains square when the housing is fully seated before any modification is made to the bumper or replacement part.

For a repeat order of the right version, use the opposite-side component only as an alignment reference, not as an interchange part before deciding whether original hardware is suitable for reuse.

Surface, Seal and Electrical Interface

Do not add wiring to a reflector-only application; use the photographs to distinguish illuminated and passive versions.

Check the lens for scratches, cracks and distortion, then compare its moulded edge with the original component.

On the 2018 Camry bumper layout, compare the outer lens edge with the moulded bumper recess because facelift bumpers can retain the same vehicle name with different apertures.

At the workshop selection stage for Camry, inspect the lower valance and nearby exhaust trim for adequate operating clearance so left- and right-hand stock cannot be mixed during consolidation.

Bumper Assembly Check

After fitting, inspect flushness from several angles and test the lamp where an electrical function is present.

Check the opposite side as a reference for height, angle and edge gap before completing the repair.

At the right rear-bumper position, check the rear housing projection against the space behind the bumper skin so the approved product can be picked consistently in a mixed wholesale order.

When reviewing the 2018 vehicle, compare the bumper corner radius with the product face from more than one viewing angle so hidden brackets are not loaded or bent during installation.

Automotive Lighting Product Specifications

Product type: Rear Bumper Light

Primary OE reference: 81910-06080

Cross-reference numbers: 81910-06080

Internal item code: TY04004-012

Vehicle brand: TOYOTA

Vehicle model: Camry

Model year: 2018

Installation position: Rear bumper / reflector opening

Side / orientation: Right

Configuration: Match the photographed reflector or powered-lamp version

Wholesale Supply and Protective Packing

Mixed orders should list left and right quantities separately and identify reflector-only and illuminated versions.

The visible face should remain separated from tape, staples and loose hardware throughout transport.

For the TOYOTA Camry application, align each locating tab with the matching slot before applying hand pressure to preserve access for a final electrical test where a lamp circuit is present.

For this Camry body configuration, check whether the original component uses a separate retainer or an integral locking tab to reduce clip damage during a no-force trial installation.

Frequently Asked Questions

How is a passive reflector checked?

Confirm the lens orientation, reflective face and flush fit without adding wiring that was not present originally.

Can the opposite side use the same part?

Do not assume interchangeability; lens angle, contour, clips and bumper recess are normally side-specific.

How should the visible lens be packed?

Keep it isolated from carton pressure, loose hardware and neighbouring products with separate support for tabs.

Why can the same model year use another version?

Regional equipment, facelift changes and bumper trim packages can alter the opening or electrical configuration.

Can appearance alone confirm compatibility?

No. A similar colour and outline can hide different clips, housing depth, wiring or side orientation.

Request a Product-Specific Quote

For mixed shipments, send a line-by-line quantity list so each rear-bumper position is quoted independently.

Physical comparison: Use the product photograph to compare the exposed face and the concealed bracket layout as one assembly.

Lighting function: Rear-bumper lighting improves low-mounted vehicle visibility; reflector-only versions return light without an electrical connection.

Selection context: A correct vehicle name is only the starting point; market trim and facelift details can change the reflector opening.

Post-fit check: Once seated, inspect the perimeter gap and verify that the bumper surface remains relaxed rather than distorted.

Wholesale enquiry: For repeat orders, quote the vehicle application and side together so the correct bumper variant is selected.

Packing reference: Powered versions benefit from a clean connector cover, while reflector versions need firm support around the rear frame.