81520-AA020 Corner Light for TOYOTA Camry 2000 Left

81520-AA020 Corner Light Overview

This vehicle-specific corner light is listed for TOYOTA Camry 2000 at the left corner-lamp position. The photographed lens, rear housing and electrical interface define the supplied configuration.

Record the verified body style with the OE reference so future replenishment uses the approved configuration. A properly matched unit combines the required signalling function with a flush interface to the surrounding panel.

Front Corner Opening and Vehicle Match

Match the narrow and wide ends of the lens to the original front corner orientation before trial fitting.

For TOYOTA Camry 2000, confirm the front corner aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.

Lamp Construction and Signal Function

The marker supplies a defined side-lighting cue and must retain the specified lens colour and orientation.

Check the connector latch by hand and avoid using wire tension to hold the plug against the lamp body. Lens colour and reflector texture should also be compared under neutral lighting.

Mounting Sequence and Final Test

Support the rear of the opening while seating the clip so pressure is not concentrated on the lens.

Retain the product label until fitment and electrical configuration have been verified. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.

Automotive Component Specifications

Product type: Corner Light / Parking Lamp

Primary OE reference: 81520-AA020

Cross-reference numbers: 81520-AA020

Internal item code: TY04006-007

Vehicle brand: TOYOTA

Vehicle model: Camry

Model year: 2000

Installation position: Front corner / parking lamp opening

Side / orientation: Left

Wholesale Supply and Packing

Send a photograph of the removed lamp when several market versions share a similar outline. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.

Frequently Asked Questions

How should 81520-AA020 compatibility be confirmed?

Match the OE reference, TOYOTA Camry production year, installation side, connector and hidden mounting geometry.

Can left and right front corner lamps be exchanged?

Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.

What should be checked before installation?

Check the corner radius, edge return and clip spacing against the original opening before installation. Confirm the bulb base or LED module matches the original circuit before closing the rear access area.

What test is recommended after fitting?

Restore the splash liner only after checking that the harness cannot rub against the tyre-side panel.

Which details are needed for a wholesale quote?

Repeat orders should reference the approved vehicle application and installation side.

Need a quotation? Contact AutoParts with the OE reference, vehicle details, side, quantity and destination.

Physical comparison: Check whether the original lens wraps toward the door or bumper and match that directional profile.

Lighting function: Once seated, the corner lamp should preserve visibility while remaining level with the adjoining bodywork.

Electrical check: Where a bulb holder is used, compare its twist-lock pattern and contact layout with the original assembly.

Installation guidance: Finish with a visual alignment check and an electrical function test where wiring is present.

Selection context: Confirm whether the vehicle uses a clear, amber or smoked repeater before final product approval.

Product handling: Protect the electrical plug from dust and impact while the workshop compares the hidden attachment points.

Wholesale enquiry: For wholesale pricing, provide OE reference, vehicle, side, quantity and destination.