81520-50060 Corner Light for LEXUS LS400 1998 Left

81520-50060 Corner Light Overview

This vehicle-specific corner light is listed for LEXUS LS400 1998 at the left corner-lamp position. The photographed lens, rear housing and electrical interface define the supplied configuration.

Treat side designation as a primary selection field whenever the lens has an asymmetric outer contour. Depending on vehicle specification, the assembly may operate as a side repeater, marker lamp or combined signal unit.

Fitment Evidence for the Corner Lamp

Check whether the original lens wraps toward the door or bumper and match that directional profile.

For LEXUS LS400 1998, confirm the front corner aperture, production period and stated side before ordering. The visible lens must align with the surrounding body surface while the concealed supports match the factory opening.

Optical Surface and Connector Review

A properly matched unit combines the required signalling function with a flush interface to the surrounding panel.

Confirm the bulb base or LED module matches the original circuit before closing the rear access area. Lens colour and reflector texture should also be compared under neutral lighting.

Workshop Installation Guidance

Complete installation by checking lens orientation, panel gap and repeater operation in one inspection.

Check the visible surface under neutral light and confirm the rear body has not been distorted. After installation, operate the relevant marker or indicator circuit and inspect panel alignment from several angles.

Automotive Component Specifications

Product type: Corner Light / Parking Lamp

Primary OE reference: 81520-50060

Cross-reference numbers: 81520-50060

Internal item code: TY04006-027

Vehicle brand: LEXUS

Vehicle model: LS400

Model year: 1998

Installation position: Front corner / parking lamp opening

Side / orientation: Left

Wholesale Supply and Packing

Quantity planning is more accurate when the enquiry distinguishes repair demand from left-right kit supply. Each optical face should be isolated from loose hardware, while projecting tabs and connectors require shaped support inside the carton.

Frequently Asked Questions

How should 81520-50060 compatibility be confirmed?

Match the OE reference, LEXUS LS400 production year, installation side, connector and hidden mounting geometry.

Can left and right front corner lamps be exchanged?

Do not assume interchangeability. Compare the lens angle, clip direction and connector exit for the required side.

What should be checked before installation?

Match the narrow and wide ends of the lens to the original front corner orientation before trial fitting. Check polarity and connector engagement on powered versions without modifying the factory harness.

What test is recommended after fitting?

Seat the locating peg before the spring clip and watch the painted edge for any sign of interference.

Which details are needed for a wholesale quote?

Send a photograph of the removed lamp when several market versions share a similar outline.

Need a quotation? Contact AutoParts with the OE reference, vehicle details, side, quantity and destination.

Physical comparison: Inspect the front corner cut-out from behind, then match the lamp shoulder and retention groove to that opening.

Lighting function: The assembly is designed around the vehicle front corner profile, not as a universal surface-mounted light.

Electrical check: Make sure the cable grommet faces away from water traps and remains fully seated after the lamp is clipped in.

Installation guidance: Support the rear of the opening while seating the clip so pressure is not concentrated on the lens.

Selection context: The OE reference should be checked together with body position and electrical configuration.

Product handling: Place the unit on clean protective material with the connector and mounting legs free from load.

Wholesale enquiry: Sample approval should record the front corner position before volume production and export packing are released.