AutoParts
8126100U8510-19 Blower Motor for JAC Heyue
Blower Motor — 8126100U8510-19. JAC Heyue. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.
- OE reference
- 8126100U8510-19
- Supplier SKU
- 6213-005
- Vehicle application
- JAC Heyue
- Part type
- Blower Motor
Key references
- OE reference
- 8126100U8510-19
- Supplier SKU
- 6213-005
- Vehicle application
- JAC Heyue
- Part type
- Blower Motor
Product specifications
| OE reference | 8126100U8510-19 |
|---|---|
| Supplier SKU | 6213-005 |
| Vehicle application | JAC Heyue |
| Vehicle make | JAC |
| Vehicle model | Heyue |
| Production years | Confirm by OE reference |
| Part type | Blower Motor |
| Cross-reference numbers | 8126100U8510-19 |
Product details
8126100U8510-19 Automotive Blower Motor Overview
Use 8126100U8510-19 as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.
For catalogue item 6213-005, Cabin 8126100U8510-19 airflow depends on the 8126100U8510-19 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6213-005 when comparing this 8126100U8510-19 airflow configuration.
OE Reference and Application
The primary catalogue number is 8126100U8510-19 . The recorded application is JAC Heyue. For 6213-005, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6213-005 with the approved OE reference.
HVAC Interface and 8126100U8510-19 installation
During work on 6213-005, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6213-005 before the lower trim is closed.
For item 6213-005, confirm that the 8126100U8510-19 centrifugal wheel clears its housing and that the 6213-005 connector lock engages without force. After seating 6213-005, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6213-005.
Automotive HVAC Blower Motor Specifications
Product type: Automotive HVAC Blower Motor
Primary OE reference: 8126100U8510-19
Cross-reference numbers: 8126100U8510-19
Vehicle brand: JAC
Vehicle model: Heyue
Model year: Confirm by OE reference
8126100U8510-19 installation area: Cabin HVAC / heater blower housing
Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel
Fitment method: OE-number and physical-geometry comparison
Quality and Trade Supply
For product 6213-005, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6213-005 record remains the picking reference.
For trade item 6213-005, Mixed orders can be reviewed by SKU and OE list, with application details kept separate for warehouse picking. Keep 6213-005 on the packing instruction.
Frequently Asked Questions
How should item 6213-005 and blower number 8126100U8510-19 be verified?
Match 6213-005 to the complete 8126100U8510-19 marking, then compare the 6213-005 plug, terminal count, mounting flange and wheel dimensions with the removed JAC unit.
Can 6213-005 have more than one vehicle-side blower configuration?
Yes. JAC production changes can affect 6213-005; confirm steering position, climate-control specification and the original 6213-005 geometry before approval.
What circuit checks are useful when 6213-005 does not operate?
For 6213-005, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6213-005 motor again.
Which details should accompany a wholesale request for 6213-005?
Provide item 6213-005, OE 8126100U8510-19, the stated application, quantity and destination; add 6213-005 carton or private-label requirements separately.
How can noise be avoided after fitting 6213-005?
Clear debris from the air inlet, check that the 6213-005 wheel turns freely, seat the 6213-005 flange evenly and keep wiring away from the impeller.
Request a quote for 6213-005: Send 8126100U8510-19, the 6213-005 application and required quantity for a fitment and supply review.
Electrical match: Confirm voltage, plug key and terminal count against the original motor
Motor interface: Compare flange contour, screw spacing and motor-body depth
Fan wheel check: Verify wheel diameter, height and rotation direction before ordering
HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.
Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.
Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.
Quotation information: Provide the OE number, vehicle application, quantity and delivery country
Product classification
Vehicle systems
Cooling System
Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Part categories
Blower Motor
Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.
Frequently Asked Questions
What should I include in a quotation request?
Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.
How can I confirm the correct part?
Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.
Can I specify packing requirements?
Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.