81220-02160 Fog Light for TOYOTA Corolla 2014-2019 Left

81220-02160 Fog Light Product Overview

For OE-led sourcing, this page connects the lamp assembly with the stated model, year and mounting side. 81220-02160 is catalogued as a fog light for TOYOTA Corolla 2014-2019, installed at the left front bumper position.

81220-02160 — Vehicle Lighting Role

A front fog lamp adds low-mounted illumination in poor visibility while keeping the beam close to the road surface. For 81220-02160 on the listed Corolla, evaluate the optical role together with the bumper aperture, nearby trim and vehicle circuit recorded under SKU TY04002-030.

For SKU TY04002-030, request carton marking before a repeat export order. Quoting 81220-02160 with the TOYOTA Corolla 2014-2019 and left position helps separate lighting-technology and model-year variants during packing.

TY04002-030 — Part Number and Geometry Review

Start with the full reference 81220-02160; then verify that the listed side matches the vehicle. Item TY04002-030 should not be approved if its housing, bracket layout, left orientation or market specification differs from the removed fog light.

81220-02160 — Optical and Connector Details

Use the 81220-02160 page photographs to review the visible lens pattern and housing finish. For electrical compatibility on SKU TY04002-030, verify bulb specification before transferring reusable parts and confirm the plug reaches its locked position without modification.

TY04002-030 — Workshop Preparation

Before securing 81220-02160, inspect damaged brackets before installing the replacement. After connecting SKU TY04002-030, test its stated lighting function and check alignment, clearance and harness routing around the front bumper area.

Automotive Lighting Product Specifications

Product type: Fog Light

Primary OE reference: 81220-02160

Cross-reference numbers: 81220-02160

Internal item code: TY04002-030

Vehicle brand: TOYOTA

Vehicle model: Corolla

Model year: 2014-2019

Installation position: Front bumper

Installation side: Left

Lighting version: Match the photographed configuration

Product function: Vehicle exterior lighting for the stated bumper position

Wholesale Supply and Protective Packing

For 81220-02160, the lens face is isolated from carton pressure, while projecting brackets are supported against impact. For SKU TY04002-030, carton selection accounts for housing depth, mounting ears and any exposed aiming hardware.

Frequently Asked Questions

Can model year alone confirm 81220-02160 fitment?

No. For SKU TY04002-030, vehicles built in the same year can use different lighting packages, so use 81220-02160 and the removed lamp geometry as the primary evidence.

Why compare the bumper opening for 81220-02160?

SKU TY04002-030 may resemble another lamp while differing in bracket spacing, housing depth or bezel interface; those differences can prevent correct seating.

How do I confirm 81220-02160 for my vehicle?

Match 81220-02160, the left position, vehicle year, housing depth, mounting ears and electrical connector with the original TOYOTA lamp.

What should be checked on the connector for 81220-02160?

Compare pin count, keying, latch position and cable direction; for LED versions, also verify that the required electronics match the Corolla application.

How should 81220-02160 be installed?

For item TY04002-030, use a no-force trial fit, transfer only suitable original hardware, secure the housing evenly and test function before reinstalling liners or trim.

Request a Product-Specific Quote

Send the complete OE reference 81220-02160, internal number TY04002-030, vehicle details, side, quantity and destination. AutoParts can review the photographed configuration before preparing a trade quotation.

Fitment basis: Match the OE number, vehicle application, model year and installation side with the original lamp.

Housing and lens check: Check the visible lens profile, housing shape and rear clearance against the original unit.

Mounting comparison: Verify the bracket layout, locating points and fastener direction before installation.

Electrical connection: Check that the harness connector seats fully and uses the same terminal arrangement.

Installation guidance: Test the lighting function before completing bumper reassembly and final alignment.

Quotation information: Include the vehicle application, lamp side, OE number and quantity for accurate order matching.