8105005ADUS170 Blower Motor for TRUMPCHE GA4

8105005ADUS170 Automotive Blower Motor Overview

Reference 8105005ADUS170 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6242-006, the 8105005ADUS170 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6242-006 when comparing this 8105005ADUS170 airflow configuration.

OE Reference and Application

The primary catalogue number is 8105005ADUS170 . The recorded application is TRUMPCHE GA4. For 6242-006, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6242-006 with the approved OE reference.

HVAC Interface and 8105005ADUS170 installation

During work on 6242-006, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6242-006 before the lower trim is closed.

For item 6242-006, confirm that the 8105005ADUS170 centrifugal wheel clears its housing and that the 6242-006 connector lock engages without force. After seating 6242-006, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6242-006.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8105005ADUS170

Cross-reference numbers: 8105005ADUS170

Vehicle brand: TRUMPCHE

Vehicle model: GA4

Model year: Confirm by OE reference

8105005ADUS170 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6242-006, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6242-006 record remains the picking reference.

For trade item 6242-006, Export buyers should state quantity and delivery country together with any pallet, carton or private-label requirement. Keep 6242-006 on the packing instruction.

Frequently Asked Questions

How should item 6242-006 and blower number 8105005ADUS170 be verified?

Match 6242-006 to the complete 8105005ADUS170 marking, then compare the 6242-006 plug, terminal count, mounting flange and wheel dimensions with the removed TRUMPCHE unit.

Can 6242-006 have more than one vehicle-side blower configuration?

Yes. TRUMPCHE production changes can affect 6242-006; confirm steering position, climate-control specification and the original 6242-006 geometry before approval.

What circuit checks are useful when 6242-006 does not operate?

For 6242-006, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6242-006 motor again.

Which details should accompany a wholesale request for 6242-006?

Provide item 6242-006, OE 8105005ADUS170, the stated application, quantity and destination; add 6242-006 carton or private-label requirements separately.

How can noise be avoided after fitting 6242-006?

Clear debris from the air inlet, check that the 6242-006 wheel turns freely, seat the 6242-006 flange evenly and keep wiring away from the impeller.

Request a quote for 6242-006: Send 8105005ADUS170, the 6242-006 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country