8103010OU1010-14 Blower Motor for JAC Rein

8103010OU1010-14 Automotive Blower Motor Overview

This product entry documents the 8103010OU1010-14 blower unit with practical identification and 8103010OU1010-14 installation checkpoints.

For catalogue item 6213-004, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 8103010OU1010-14 blower important at idle and in traffic. Use 6213-004 when comparing this 8103010OU1010-14 airflow configuration.

OE Reference and Application

The primary catalogue number is 8103010OU1010-14 . The recorded application is JAC Rein. For 6213-004, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6213-004 with the approved OE reference.

HVAC Interface and 8103010OU1010-14 installation

During work on 6213-004, After 8103010OU1010-14 installation, operate low through high speed and confirm 8103010OU1010-14 airflow reaches the selected vents without abnormal vibration. Recheck 6213-004 before the lower trim is closed.

For item 6213-004, confirm that the 8103010OU1010-14 centrifugal wheel clears its housing and that the 6213-004 connector lock engages without force. After seating 6213-004, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6213-004.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8103010OU1010-14

Cross-reference numbers: 8103010OU1010-14

Vehicle brand: JAC

Vehicle model: Rein

Model year: Confirm by OE reference

8103010OU1010-14 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6213-004, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6213-004 record remains the picking reference.

For trade item 6213-004, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6213-004 on the packing instruction.

Frequently Asked Questions

How should item 6213-004 and blower number 8103010OU1010-14 be verified?

Match 6213-004 to the complete 8103010OU1010-14 marking, then compare the 6213-004 plug, terminal count, mounting flange and wheel dimensions with the removed JAC unit.

Can 6213-004 have more than one vehicle-side blower configuration?

Yes. JAC production changes can affect 6213-004; confirm steering position, climate-control specification and the original 6213-004 geometry before approval.

What circuit checks are useful when 6213-004 does not operate?

For 6213-004, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6213-004 motor again.

Which details should accompany a wholesale request for 6213-004?

Provide item 6213-004, OE 8103010OU1010-14, the stated application, quantity and destination; add 6213-004 carton or private-label requirements separately.

How can noise be avoided after fitting 6213-004?

Clear debris from the air inlet, check that the 6213-004 wheel turns freely, seat the 6213-004 flange evenly and keep wiring away from the impeller.

Request a quote for 6213-004: Send 8103010OU1010-14, the 6213-004 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country