8100100U0030-F211 Blower Motor for JAC Refine S7

8100100U0030-F211 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 8100100U0030-F211 to support OE-number comparison before purchase.

For catalogue item 6213-007, Cabin 8100100U0030-F211 airflow depends on the 8100100U0030-F211 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6213-007 when comparing this 8100100U0030-F211 airflow configuration.

OE Reference and Application

The primary catalogue number is 8100100U0030-F211 . The recorded application is JAC Refine S7. For 6213-007, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6213-007 with the approved OE reference.

HVAC Interface and 8100100U0030-F211 installation

During work on 6213-007, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6213-007 before the lower trim is closed.

For item 6213-007, confirm that the 8100100U0030-F211 centrifugal wheel clears its housing and that the 6213-007 connector lock engages without force. After seating 6213-007, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6213-007.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 8100100U0030-F211

Cross-reference numbers: 8100100U0030-F211

Vehicle brand: JAC

Vehicle model: Refine S7

Model year: Confirm by OE reference

8100100U0030-F211 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6213-007, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6213-007 record remains the picking reference.

For trade item 6213-007, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6213-007 on the packing instruction.

Frequently Asked Questions

How should item 6213-007 and blower number 8100100U0030-F211 be verified?

Match 6213-007 to the complete 8100100U0030-F211 marking, then compare the 6213-007 plug, terminal count, mounting flange and wheel dimensions with the removed JAC unit.

Can 6213-007 have more than one vehicle-side blower configuration?

Yes. JAC production changes can affect 6213-007; confirm steering position, climate-control specification and the original 6213-007 geometry before approval.

What circuit checks are useful when 6213-007 does not operate?

For 6213-007, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6213-007 motor again.

Which details should accompany a wholesale request for 6213-007?

Provide item 6213-007, OE 8100100U0030-F211, the stated application, quantity and destination; add 6213-007 carton or private-label requirements separately.

How can noise be avoided after fitting 6213-007?

Clear debris from the air inlet, check that the 6213-007 wheel turns freely, seat the 6213-007 flange evenly and keep wiring away from the impeller.

Request a quote for 6213-007: Send 8100100U0030-F211, the 6213-007 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country