7P0820021G Blower Motor for AUDI Touareg 2011-2016

7P0820021G Automotive Blower Motor Overview

This product entry documents the 7P0820021G blower unit with practical identification and 7P0820021G installation checkpoints.

For catalogue item 6233-008, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 7P0820021G blower important at idle and in traffic. Use 6233-008 when comparing this 7P0820021G airflow configuration.

OE Reference and Application

The primary catalogue number is 7P0820021G . The recorded application is AUDI Touareg 2011-2016. For 6233-008, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6233-008 with the approved OE reference.

HVAC Interface and 7P0820021G installation

During work on 6233-008, After 7P0820021G installation, operate low through high speed and confirm 7P0820021G airflow reaches the selected vents without abnormal vibration. Recheck 6233-008 before the lower trim is closed.

For item 6233-008, confirm that the 7P0820021G centrifugal wheel clears its housing and that the 6233-008 connector lock engages without force. After seating 6233-008, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6233-008.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7P0820021G

Cross-reference numbers: 64116933910 / TYC700280 / PM4075 / 8EW351040651 / 76935 / 700280 / NRF / 34086 / NIS / 87117 / 7P0820021C / 0130115560 / 52422919

Vehicle brand: AUDI

Vehicle model: Touareg

Model year: 2011-2016

7P0820021G installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6233-008, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6233-008 record remains the picking reference.

For trade item 6233-008, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6233-008 on the packing instruction.

Frequently Asked Questions

How should item 6233-008 and blower number 7P0820021G be verified?

Match 6233-008 to the complete 7P0820021G marking, then compare the 6233-008 plug, terminal count, mounting flange and wheel dimensions with the removed AUDI unit.

Can 6233-008 have more than one vehicle-side blower configuration?

Yes. AUDI production changes can affect 6233-008; confirm steering position, climate-control specification and the original 6233-008 geometry before approval.

What circuit checks are useful when 6233-008 does not operate?

For 6233-008, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6233-008 motor again.

Which details should accompany a wholesale request for 6233-008?

Provide item 6233-008, OE 7P0820021G, the stated application, quantity and destination; add 6233-008 carton or private-label requirements separately.

How can noise be avoided after fitting 6233-008?

Clear debris from the air inlet, check that the 6233-008 wheel turns freely, seat the 6233-008 flange evenly and keep wiring away from the impeller.

Request a quote for 6233-008: Send 7P0820021G, the 6233-008 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country