7M59-17A065-LA Small Wheel Center Cap for 2005 Ford Focus

7M59-17A065-LA Small Wheel Center Cap Overview

7M59-17A065-LA identifies the listed small wheel center cap for 2005 FORD Focus. This listing is the small centre cover rather than a full wheel trim, so wheel design and opening diameter are decisive.

Wheel and Cap Identification

The narrow perimeter should sit evenly within the 2005 Focus wheel recess. Check tab count, tab direction and rear projection against the removed cap before approving a mixed wheel set.

Removal and Installation

Remove the old cap with a plastic trim tool from a supported edge. Clean accumulated grit from the wheel recess, then align the replacement so all retaining elements begin entering together.

Finish Care and Wheel Service

Use pH-neutral wheel cleaner and a soft cloth on the visible surface. Strong acid, stiff brushes and direct high-pressure spray at the edge can shorten the life of the finish and retention hardware.

Product-Specific Stock Control

Stock SKU FD02043-003 with 7M59-17A065-LA, FORD Focus, 2005 and the wheel-centre location on one label. Separate close-looking cap diameters and keep rear clips protected from bin pressure. The narrow perimeter should sit evenly within the 2005 Focus wheel recess. Check tab count, tab direction and rear projection against the removed cap before approving a mixed wheel set.

Automotive Replacement Part Specifications

Product type: Small Wheel Center Cap

Primary OE reference: 7M59-17A065-LA

Internal item code: FD02043-003

Vehicle brand: FORD

Model: Focus

Vehicle year: 2005

Applicable vehicle: 2005 FORD Focus

Installation position: Centre opening of the wheel

Identification detail: compact Focus hub cover with narrow perimeter and snap-in rear tabs

Cross-reference numbers: 7M59-17A065-LA

Trade Packing and Supply

Use a non-abrasive sleeve over the decorated face and support the rear clips so they cannot be flattened. Label the carton with FD02043-003, 7M59-17A065-LA and the applicable wheel position.

Frequently Asked Questions

What does 7M59-17A065-LA identify?

7M59-17A065-LA identifies the listed small wheel center cap for 2005 FORD Focus.

What should be measured for FD02043-003?

Compare the visible diameter, wheel recess, rear tab circle, clip count and insertion depth.

Is the emblem face enough to confirm fitment?

No. Different wheel designs can share a similar face while using different rear retention geometry.

How should the cap be installed?

Clean the recess, align every clip and apply even hand pressure around the perimeter.

What information supports a wholesale quotation?

Provide 7M59-17A065-LA, SKU FD02043-003, wheel design, destination and quantity.

Fitment verification: Confirm 7M59-17A065-LA, cap diameter, wheel opening, rear tab layout and insertion depth.

Installation guidance: Clean the wheel recess, align every tab and press evenly around the perimeter without striking the decorated face.

Purchase reference: Quote SKU FD02043-003, OE number, wheel design, vehicle application and quantity.