7M1819021D Blower Motor for FORD Galaxy

7M1819021D Automotive Blower Motor Overview

Reference 7M1819021D identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6203-013, the 7M1819021D blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6203-013 when comparing this 7M1819021D airflow configuration.

OE Reference and Application

The primary catalogue number is 7M1819021D . The recorded application is FORD Galaxy. For 6203-013, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6203-013 with the approved OE reference.

HVAC Interface and 7M1819021D installation

During work on 6203-013, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6203-013 before the lower trim is closed.

For item 6203-013, confirm that the 7M1819021D centrifugal wheel clears its housing and that the 6203-013 connector lock engages without force. After seating 6203-013, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-013.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7M1819021D

Cross-reference numbers: 1038587 / 715239 / 7M1819015 / 7M1819015B / 7M1819021B / 95NW18456AC / 95NW18456AD

Vehicle brand: FORD

Vehicle model: Galaxy

Model year: Confirm by OE reference

7M1819021D installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-013, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6203-013 record remains the picking reference.

For trade item 6203-013, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6203-013 on the packing instruction.

Frequently Asked Questions

How should item 6203-013 and blower number 7M1819021D be verified?

Match 6203-013 to the complete 7M1819021D marking, then compare the 6203-013 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-013 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-013; confirm steering position, climate-control specification and the original 6203-013 geometry before approval.

What circuit checks are useful when 6203-013 does not operate?

For 6203-013, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-013 motor again.

Which details should accompany a wholesale request for 6203-013?

Provide item 6203-013, OE 7M1819021D, the stated application, quantity and destination; add 6203-013 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-013?

Clear debris from the air inlet, check that the 6203-013 wheel turns freely, seat the 6203-013 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-013: Send 7M1819021D, the 6203-013 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country