79310S84A01 Blower Motor for HONDA Accord 1998-2002

79310S84A01 Automotive Blower Motor Overview

This product entry documents the 79310S84A01 blower unit with practical identification and 79310S84A01 installation checkpoints.

For catalogue item 6207-014, Stable wheel rotation helps distribute air without relying on vehicle speed, making the 79310S84A01 blower important at idle and in traffic. Use 6207-014 when comparing this 79310S84A01 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310S84A01 . The recorded application is HONDA Accord 1998-2002. For 6207-014, Confirm connector orientation, wheel depth, housing diameter and screw pattern before approving the order. Record 6207-014 with the approved OE reference.

HVAC Interface and 79310S84A01 installation

During work on 6207-014, After 79310S84A01 installation, operate low through high speed and confirm 79310S84A01 airflow reaches the selected vents without abnormal vibration. Recheck 6207-014 before the lower trim is closed.

For item 6207-014, confirm that the 79310S84A01 centrifugal wheel clears its housing and that the 6207-014 connector lock engages without force. After seating 6207-014, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-014.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310S84A01

Cross-reference numbers: 79310S3VA01 / 15-80955 / TYC700002 / BM9352C / PM3929 / PM9352 / 35201 / 615-58456 / 79310S0XA51 / 700006 / PM9210 / 5019640AB / AY194000-9042 / 79310S1AG01 / 79310-SXO-A01 / 194000-1060 / 79310-SAA-000 / 8710360220 / GFJ083 / 8710350050 / 87310-0C020

Vehicle brand: HONDA

Vehicle model: Accord

Model year: 1998-2002

79310S84A01 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-014, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-014 record remains the picking reference.

For trade item 6207-014, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6207-014 on the packing instruction.

Frequently Asked Questions

How should item 6207-014 and blower number 79310S84A01 be verified?

Match 6207-014 to the complete 79310S84A01 marking, then compare the 6207-014 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-014 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-014; confirm steering position, climate-control specification and the original 6207-014 geometry before approval.

What circuit checks are useful when 6207-014 does not operate?

For 6207-014, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-014 motor again.

Which details should accompany a wholesale request for 6207-014?

Provide item 6207-014, OE 79310S84A01, the stated application, quantity and destination; add 6207-014 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-014?

Clear debris from the air inlet, check that the 6207-014 wheel turns freely, seat the 6207-014 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-014: Send 79310S84A01, the 6207-014 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: When the climate-control circuit commands airflow, the electric motor rotates the fan wheel inside the HVAC housing.

Installation guidance: After installation, operate low through high speed and confirm airflow reaches the selected vents without abnormal vibration.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country