AutoParts

79310-TS6-AO1 Blower Motor for HONDA Civic 2012-2015

Blower Motor — 79310-TS6-AO1. HONDA Civic 2012-2015. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
79310-TS6-AO1
Supplier SKU
6207-009
Vehicle application
HONDA Civic 2012-2015
Part type
Blower Motor
Send an inquiry

Key references

OE reference
79310-TS6-AO1
Supplier SKU
6207-009
Vehicle application
HONDA Civic 2012-2015
Part type
Blower Motor

Product specifications

OE reference79310-TS6-AO1
Supplier SKU6207-009
Vehicle applicationHONDA Civic 2012-2015
Vehicle makeHONDA
Vehicle modelCivic
Production years2012-2015
Part typeBlower Motor
Cross-reference numbers79310-TS6-AO1

Product details

79310-TS6-AO1 Automotive Blower Motor Overview

Buyers comparing an interior fan motor can use 79310-TS6-AO1 together with the 79310-TS6-AO1 product images and vehicle data on this page.

For catalogue item 6207-009, the 79310-TS6-AO1 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-009 when comparing this 79310-TS6-AO1 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-TS6-AO1 . The recorded application is HONDA Civic 2012-2015. For 6207-009, Use the original motor number and clear front/rear photographs to distinguish similar left-hand-drive and right-hand-drive versions. Record 6207-009 with the approved OE reference.

HVAC Interface and 79310-TS6-AO1 installation

During work on 6207-009, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-009 before the lower trim is closed.

For item 6207-009, confirm that the 79310-TS6-AO1 centrifugal wheel clears its housing and that the 6207-009 connector lock engages without force. After seating 6207-009, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-009.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-TS6-AO1

Cross-reference numbers: 79310-TS6-AO1

Vehicle brand: HONDA

Vehicle model: Civic

Model year: 2012-2015

79310-TS6-AO1 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-009, Packing preparation accounts for the 79310-TS6-AO1 motor weight and wheel shape to reduce movement inside the carton. The 6207-009 record remains the picking reference.

For trade item 6207-009, To reduce selection errors, include the original-part photograph and connector view with the purchase list. Keep 6207-009 on the packing instruction.

Frequently Asked Questions

How should item 6207-009 and blower number 79310-TS6-AO1 be verified?

Match 6207-009 to the complete 79310-TS6-AO1 marking, then compare the 6207-009 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-009 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-009; confirm steering position, climate-control specification and the original 6207-009 geometry before approval.

What circuit checks are useful when 6207-009 does not operate?

For 6207-009, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-009 motor again.

Which details should accompany a wholesale request for 6207-009?

Provide item 6207-009, OE 79310-TS6-AO1, the stated application, quantity and destination; add 6207-009 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-009?

Clear debris from the air inlet, check that the 6207-009 wheel turns freely, seat the 6207-009 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-009: Send 79310-TS6-AO1, the 6207-009 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Installation guidance: Disconnect electrical power as required, remove trim without forcing clips, and trial-fit the blower before final tightening.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.