79310-TLA-A51 Blower Motor for HONDA CR-V 2018

79310-TLA-A51 Automotive Blower Motor Overview

This listing links 79310-TLA-A51 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6207-023, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6207-023 when comparing this 79310-TLA-A51 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-TLA-A51 . The recorded application is HONDA CR-V 2018. For 6207-023, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6207-023 with the approved OE reference.

HVAC Interface and 79310-TLA-A51 installation

During work on 6207-023, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 79310-TLA-A51 installation. Recheck 6207-023 before the lower trim is closed.

For item 6207-023, confirm that the 79310-TLA-A51 centrifugal wheel clears its housing and that the 6207-023 connector lock engages without force. After seating 6207-023, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-023.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-TLA-A51

Cross-reference numbers: 272700-6520 / 79310THRA41 / 10092 / 75113 / 272700-4185 / 6552914 / 272700-4311

Vehicle brand: HONDA

Vehicle model: CR-V

Model year: 2018

79310-TLA-A51 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-023, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-023 record remains the picking reference.

For trade item 6207-023, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6207-023 on the packing instruction.

Frequently Asked Questions

How should item 6207-023 and blower number 79310-TLA-A51 be verified?

Match 6207-023 to the complete 79310-TLA-A51 marking, then compare the 6207-023 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-023 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-023; confirm steering position, climate-control specification and the original 6207-023 geometry before approval.

What circuit checks are useful when 6207-023 does not operate?

For 6207-023, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-023 motor again.

Which details should accompany a wholesale request for 6207-023?

Provide item 6207-023, OE 79310-TLA-A51, the stated application, quantity and destination; add 6207-023 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-023?

Clear debris from the air inlet, check that the 6207-023 wheel turns freely, seat the 6207-023 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-023: Send 79310-TLA-A51, the 6207-023 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country