79310-SWW-E01 Blower Motor for HONDA Accord 2008-2013

79310-SWW-E01 Automotive Blower Motor Overview

Reference 79310-SWW-E01 identifies the cabin-air blower assembly shown for the stated vehicle application.

For catalogue item 6207-026, the 79310-SWW-E01 blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode. Use 6207-026 when comparing this 79310-SWW-E01 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-SWW-E01 . The recorded application is HONDA Accord 2008-2013. For 6207-026, For mixed-market vehicles, confirm steering position and climate-control specification together with the physical blower dimensions. Record 6207-026 with the approved OE reference.

HVAC Interface and 79310-SWW-E01 installation

During work on 6207-026, Check the air inlet for foreign material before fitting the replacement so debris does not damage or unbalance the new wheel. Recheck 6207-026 before the lower trim is closed.

For item 6207-026, confirm that the 79310-SWW-E01 centrifugal wheel clears its housing and that the 6207-026 connector lock engages without force. After seating 6207-026, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-026.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-SWW-E01

Cross-reference numbers: 79310-SWW-E01

Vehicle brand: HONDA

Vehicle model: Accord

Model year: 2008-2013

79310-SWW-E01 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-026, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-026 record remains the picking reference.

For trade item 6207-026, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6207-026 on the packing instruction.

Frequently Asked Questions

How should item 6207-026 and blower number 79310-SWW-E01 be verified?

Match 6207-026 to the complete 79310-SWW-E01 marking, then compare the 6207-026 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-026 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-026; confirm steering position, climate-control specification and the original 6207-026 geometry before approval.

What circuit checks are useful when 6207-026 does not operate?

For 6207-026, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-026 motor again.

Which details should accompany a wholesale request for 6207-026?

Provide item 6207-026, OE 79310-SWW-E01, the stated application, quantity and destination; add 6207-026 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-026?

Clear debris from the air inlet, check that the 6207-026 wheel turns freely, seat the 6207-026 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-026: Send 79310-SWW-E01, the 6207-026 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country