79310-SMG-G41 Blower Motor for HONDA Civic

79310-SMG-G41 Automotive Blower Motor Overview

The photographed motor-and-wheel unit is indexed by 79310-SMG-G41 to support OE-number comparison before purchase.

For catalogue item 6207-043, Cabin 79310-SMG-G41 airflow depends on the 79310-SMG-G41 motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6207-043 when comparing this 79310-SMG-G41 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-SMG-G41 . The recorded application is HONDA Civic. For 6207-043, Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower. Record 6207-043 with the approved OE reference.

HVAC Interface and 79310-SMG-G41 installation

During work on 6207-043, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6207-043 before the lower trim is closed.

For item 6207-043, confirm that the 79310-SMG-G41 centrifugal wheel clears its housing and that the 6207-043 connector lock engages without force. After seating 6207-043, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-043.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-SMG-G41

Cross-reference numbers: 34256 / DD4008TT

Vehicle brand: HONDA

Vehicle model: Civic

Model year: Confirm by OE reference

79310-SMG-G41 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-043, Product preparation focuses on clean fan-wheel geometry, intact terminals and protection of projecting plastic features. The 6207-043 record remains the picking reference.

For trade item 6207-043, Wholesale enquiries should identify the reference, quantity, market and packaging requirement so the correct variant is selected. Keep 6207-043 on the packing instruction.

Frequently Asked Questions

How should item 6207-043 and blower number 79310-SMG-G41 be verified?

Match 6207-043 to the complete 79310-SMG-G41 marking, then compare the 6207-043 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-043 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-043; confirm steering position, climate-control specification and the original 6207-043 geometry before approval.

What circuit checks are useful when 6207-043 does not operate?

For 6207-043, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-043 motor again.

Which details should accompany a wholesale request for 6207-043?

Provide item 6207-043, OE 79310-SMG-G41, the stated application, quantity and destination; add 6207-043 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-043?

Clear debris from the air inlet, check that the 6207-043 wheel turns freely, seat the 6207-043 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-043: Send 79310-SMG-G41, the 6207-043 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country