AutoParts

79310-SDG-OOO Blower Motor for HONDA Accord 2003-2007

Blower Motor — 79310-SDG-OOO. HONDA Accord 2003-2007. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
79310-SDG-OOO
Supplier SKU
6207-010
Vehicle application
HONDA Accord 2003-2007
Part type
Blower Motor
Send an inquiry

Key references

OE reference
79310-SDG-OOO
Supplier SKU
6207-010
Vehicle application
HONDA Accord 2003-2007
Part type
Blower Motor

Product specifications

OE reference79310-SDG-OOO
Supplier SKU6207-010
Vehicle applicationHONDA Accord 2003-2007
Vehicle makeHONDA
Vehicle modelAccord
Production years2003-2007
Part typeBlower Motor
Cross-reference numbers79310-SDG-OOO

Product details

79310-SDG-OOO Automotive Blower Motor Overview

Use 79310-SDG-OOO as the initial catalogue reference for the pictured cabin blower motor, then confirm the physical interfaces.

For catalogue item 6207-010, Cabin 79310-SDG-OOO airflow depends on the 79310-SDG-OOO motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together. Use 6207-010 when comparing this 79310-SDG-OOO airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-SDG-OOO . The recorded application is HONDA Accord 2003-2007. For 6207-010, Review the original connector photograph and fastening layout when catalogue applications include more than one HVAC configuration. Record 6207-010 with the approved OE reference.

HVAC Interface and 79310-SDG-OOO installation

During work on 6207-010, Inspect the resistor or electronic controller and connector terminals if the original fault involved intermittent speed operation. Recheck 6207-010 before the lower trim is closed.

For item 6207-010, confirm that the 79310-SDG-OOO centrifugal wheel clears its housing and that the 6207-010 connector lock engages without force. After seating 6207-010, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-010.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-SDG-OOO

Cross-reference numbers: 79310-SDG-OOO

Vehicle brand: HONDA

Vehicle model: Accord

Model year: 2003-2007

79310-SDG-OOO installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-010, Packing preparation accounts for the 79310-SDG-OOO motor weight and wheel shape to reduce movement inside the carton. The 6207-010 record remains the picking reference.

For trade item 6207-010, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6207-010 on the packing instruction.

Frequently Asked Questions

How should item 6207-010 and blower number 79310-SDG-OOO be verified?

Match 6207-010 to the complete 79310-SDG-OOO marking, then compare the 6207-010 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-010 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-010; confirm steering position, climate-control specification and the original 6207-010 geometry before approval.

What circuit checks are useful when 6207-010 does not operate?

For 6207-010, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-010 motor again.

Which details should accompany a wholesale request for 6207-010?

Provide item 6207-010, OE 79310-SDG-OOO, the stated application, quantity and destination; add 6207-010 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-010?

Clear debris from the air inlet, check that the 6207-010 wheel turns freely, seat the 6207-010 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-010: Send 79310-SDG-OOO, the 6207-010 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Cabin airflow depends on the motor, fan wheel, resistor or controller, wiring and an unobstructed filter working together.

Installation guidance: Do not energize the unit while loose in the housing; secure it correctly before performing the functional check.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.