79310-SDC-A01 Blower Motor for HONDA Accord

79310-SDC-A01 Automotive Blower Motor Overview

This page records the pictured HVAC blower motor under OE reference 79310-SDC-A01 for application-led sourcing.

For catalogue item 6207-039, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6207-039 when comparing this 79310-SDC-A01 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-SDC-A01 . The recorded application is HONDA Accord. For 6207-039, Measure the 79310-SDC-A01 wheel height and outer diameter, then compare the electrical socket and base contour with the 79310-SDC-A01 product photos. Record 6207-039 with the approved OE reference.

HVAC Interface and 79310-SDC-A01 installation

During work on 6207-039, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 79310-SDC-A01 installation. Recheck 6207-039 before the lower trim is closed.

For item 6207-039, confirm that the 79310-SDC-A01 centrifugal wheel clears its housing and that the 6207-039 connector lock engages without force. After seating 6207-039, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-039.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-SDC-A01

Cross-reference numbers: 79310-SHJ-A01 / TYC700003 / PM9175 / 7573575288

Vehicle brand: HONDA

Vehicle model: Accord

Model year: Confirm by OE reference

79310-SDC-A01 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-039, Packing preparation accounts for the 79310-SDC-A01 motor weight and wheel shape to reduce movement inside the carton. The 6207-039 record remains the picking reference.

For trade item 6207-039, For a quotation, provide the OE number, required quantity, vehicle application, destination and preferred carton marking. Keep 6207-039 on the packing instruction.

Frequently Asked Questions

How should item 6207-039 and blower number 79310-SDC-A01 be verified?

Match 6207-039 to the complete 79310-SDC-A01 marking, then compare the 6207-039 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-039 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-039; confirm steering position, climate-control specification and the original 6207-039 geometry before approval.

What circuit checks are useful when 6207-039 does not operate?

For 6207-039, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-039 motor again.

Which details should accompany a wholesale request for 6207-039?

Provide item 6207-039, OE 79310-SDC-A01, the stated application, quantity and destination; add 6207-039 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-039?

Clear debris from the air inlet, check that the 6207-039 wheel turns freely, seat the 6207-039 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-039: Send 79310-SDC-A01, the 6207-039 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country