79310-SAA-G00 Blower Motor for HONDA Fit 2003-2008

79310-SAA-G00 Automotive Blower Motor Overview

The 79310-SAA-G00 record is prepared for application-specific HVAC blower replacement and wholesale quotation.

For catalogue item 6207-012, When the climate-control circuit commands 79310-SAA-G00 airflow, the electric motor rotates the 79310-SAA-G00 fan wheel inside the HVAC housing. Use 6207-012 when comparing this 79310-SAA-G00 airflow configuration.

OE Reference and Application

The primary catalogue number is 79310-SAA-G00 . The recorded application is HONDA Fit 2003-2008. For 6207-012, Verify the complete suffix on the OE number because nearby references can use different plugs or mounting geometry. Record 6207-012 with the approved OE reference.

HVAC Interface and 79310-SAA-G00 installation

During work on 6207-012, If 79310-SAA-G00 airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the 79310-SAA-G00 motor is the only cause. Recheck 6207-012 before the lower trim is closed.

For item 6207-012, confirm that the 79310-SAA-G00 centrifugal wheel clears its housing and that the 6207-012 connector lock engages without force. After seating 6207-012, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6207-012.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 79310-SAA-G00

Cross-reference numbers: 79310-SAA-G01 / 79310-SAA-000 / 79310-SAA-305 / RYO700238 / 76953 / 19400-0412 / 19400-1060 / 871030D170 / MC-6009 / 194000-0352 / 79310SADM01 / 79310TJ5F02 / 871030D171 / 871030D180 / 871030D181 / 7415077J20000 / F006B10060

Vehicle brand: HONDA

Vehicle model: Fit

Model year: 2003-2008

79310-SAA-G00 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6207-012, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6207-012 record remains the picking reference.

For trade item 6207-012, For repeat orders, quote the same SKU and OE reference while noting any change in vehicle market or steering position. Keep 6207-012 on the packing instruction.

Frequently Asked Questions

How should item 6207-012 and blower number 79310-SAA-G00 be verified?

Match 6207-012 to the complete 79310-SAA-G00 marking, then compare the 6207-012 plug, terminal count, mounting flange and wheel dimensions with the removed HONDA unit.

Can 6207-012 have more than one vehicle-side blower configuration?

Yes. HONDA production changes can affect 6207-012; confirm steering position, climate-control specification and the original 6207-012 geometry before approval.

What circuit checks are useful when 6207-012 does not operate?

For 6207-012, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6207-012 motor again.

Which details should accompany a wholesale request for 6207-012?

Provide item 6207-012, OE 79310-SAA-G00, the stated application, quantity and destination; add 6207-012 carton or private-label requirements separately.

How can noise be avoided after fitting 6207-012?

Clear debris from the air inlet, check that the 6207-012 wheel turns freely, seat the 6207-012 flange evenly and keep wiring away from the impeller.

Request a quote for 6207-012: Send 79310-SAA-G00, the 6207-012 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: Stable wheel rotation helps distribute air without relying on vehicle speed, making the blower important at idle and in traffic.

Installation guidance: If airflow remains weak, inspect the filter, ducts, air doors and speed-control circuit rather than assuming the motor is the only cause.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country