AutoParts

7802A216 Blower Motor for MITSUBISHI Lancer 2008-2017

Blower Motor — 7802A216. MITSUBISHI Lancer 2008-2017. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
7802A216
Supplier SKU
6215-016
Vehicle application
MITSUBISHI Lancer 2008-2017
Part type
Blower Motor
Send an inquiry

Key references

OE reference
7802A216
Supplier SKU
6215-016
Vehicle application
MITSUBISHI Lancer 2008-2017
Part type
Blower Motor

Product specifications

OE reference7802A216
Supplier SKU6215-016
Vehicle applicationMITSUBISHI Lancer 2008-2017
Vehicle makeMITSUBISHI
Vehicle modelLancer
Production years2008-2017
Part typeBlower Motor
Cross-reference numbers7802A216

Product details

7802A216 Automotive Blower Motor Overview

This listing links 7802A216 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6215-016, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6215-016 when comparing this 7802A216 airflow configuration.

OE Reference and Application

The primary catalogue number is 7802A216 . The recorded application is MITSUBISHI Lancer 2008-2017. For 6215-016, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6215-016 with the approved OE reference.

HVAC Interface and 7802A216 installation

During work on 6215-016, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 7802A216 installation. Recheck 6215-016 before the lower trim is closed.

For item 6215-016, confirm that the 7802A216 centrifugal wheel clears its housing and that the 6215-016 connector lock engages without force. After seating 6215-016, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6215-016.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7802A216

Cross-reference numbers: 7802A216

Vehicle brand: MITSUBISHI

Vehicle model: Lancer

Model year: 2008-2017

7802A216 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6215-016, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6215-016 record remains the picking reference.

For trade item 6215-016, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6215-016 on the packing instruction.

Frequently Asked Questions

How should item 6215-016 and blower number 7802A216 be verified?

Match 6215-016 to the complete 7802A216 marking, then compare the 6215-016 plug, terminal count, mounting flange and wheel dimensions with the removed MITSUBISHI unit.

Can 6215-016 have more than one vehicle-side blower configuration?

Yes. MITSUBISHI production changes can affect 6215-016; confirm steering position, climate-control specification and the original 6215-016 geometry before approval.

What circuit checks are useful when 6215-016 does not operate?

For 6215-016, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6215-016 motor again.

Which details should accompany a wholesale request for 6215-016?

Provide item 6215-016, OE 7802A216, the stated application, quantity and destination; add 6215-016 carton or private-label requirements separately.

How can noise be avoided after fitting 6215-016?

Clear debris from the air inlet, check that the 6215-016 wheel turns freely, seat the 6215-016 flange evenly and keep wiring away from the impeller.

Request a quote for 6215-016: Send 7802A216, the 6215-016 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.