AutoParts

77365027 Blower Motor for FIAT

Blower Motor — 77365027. FIAT. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
77365027
Supplier SKU
6219-047
Vehicle application
FIAT
Part type
Blower Motor
Send an inquiry

Key references

OE reference
77365027
Supplier SKU
6219-047
Vehicle application
FIAT
Part type
Blower Motor

Product specifications

OE reference77365027
Supplier SKU6219-047
Vehicle applicationFIAT
Vehicle makeFIAT
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbersDEA09072 / FT8444 / 17008444

Product details

77365027 Automotive Blower Motor Overview

This page records the pictured HVAC blower motor under OE reference 77365027 for application-led sourcing.

For catalogue item 6219-047, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6219-047 when comparing this 77365027 airflow configuration.

OE Reference and Application

The primary catalogue number is 77365027 . The recorded application is FIAT. For 6219-047, Measure the 77365027 wheel height and outer diameter, then compare the electrical socket and base contour with the 77365027 product photos. Record 6219-047 with the approved OE reference.

HVAC Interface and 77365027 installation

During work on 6219-047, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 77365027 installation. Recheck 6219-047 before the lower trim is closed.

For item 6219-047, confirm that the 77365027 centrifugal wheel clears its housing and that the 6219-047 connector lock engages without force. After seating 6219-047, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6219-047.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 77365027

Cross-reference numbers: DEA09072 / FT8444 / 17008444

Vehicle brand: FIAT

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

77365027 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6219-047, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6219-047 record remains the picking reference.

For trade item 6219-047, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6219-047 on the packing instruction.

Frequently Asked Questions

How should item 6219-047 and blower number 77365027 be verified?

Match 6219-047 to the complete 77365027 marking, then compare the 6219-047 plug, terminal count, mounting flange and wheel dimensions with the removed FIAT unit.

Can 6219-047 have more than one vehicle-side blower configuration?

Yes. FIAT production changes can affect 6219-047; confirm steering position, climate-control specification and the original 6219-047 geometry before approval.

What circuit checks are useful when 6219-047 does not operate?

For 6219-047, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6219-047 motor again.

Which details should accompany a wholesale request for 6219-047?

Provide item 6219-047, OE 77365027, the stated application, quantity and destination; add 6219-047 carton or private-label requirements separately.

How can noise be avoided after fitting 6219-047?

Clear debris from the air inlet, check that the 6219-047 wheel turns freely, seat the 6219-047 flange evenly and keep wiring away from the impeller.

Request a quote for 6219-047: Send 77365027, the 6219-047 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.