AutoParts

7701060014 Blower Motor for RENAULT

Blower Motor — 7701060014. RENAULT. Automotive replacement parts for wholesale sourcing. Check the OE reference and vehicle application before requesting a quotation.

OE reference
7701060014
Supplier SKU
6229-024
Vehicle application
RENAULT
Part type
Blower Motor
Send an inquiry

Key references

OE reference
7701060014
Supplier SKU
6229-024
Vehicle application
RENAULT
Part type
Blower Motor

Product specifications

OE reference7701060014
Supplier SKU6229-024
Vehicle applicationRENAULT
Vehicle makeRENAULT
Vehicle modelConfirm by OE reference
Production yearsConfirm by OE reference
Part typeBlower Motor
Cross-reference numbers7701060015 / 7701209802 / 715071

Product details

7701060014 Automotive Blower Motor Overview

This listing links 7701060014 with the supplied blower-motor geometry, connector and application information.

For catalogue item 6229-024, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6229-024 when comparing this 7701060014 airflow configuration.

OE Reference and Application

The primary catalogue number is 7701060014 . The recorded application is RENAULT. For 6229-024, Final approval should combine the OE reference with a direct geometry comparison of the removed part. Record 6229-024 with the approved OE reference.

HVAC Interface and 7701060014 installation

During work on 6229-024, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 7701060014 installation. Recheck 6229-024 before the lower trim is closed.

For item 6229-024, confirm that the 7701060014 centrifugal wheel clears its housing and that the 6229-024 connector lock engages without force. After seating 6229-024, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6229-024.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 7701060014

Cross-reference numbers: 7701060015 / 7701209802 / 715071

Vehicle brand: RENAULT

Vehicle model: Confirm by OE reference

Model year: Confirm by OE reference

7701060014 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6229-024, The supplied configuration follows the photographed item; included hardware should be confirmed during quotation. The 6229-024 record remains the picking reference.

For trade item 6229-024, Distributors can request neutral or customized packing after quantities, label content and destination are confirmed. Keep 6229-024 on the packing instruction.

Frequently Asked Questions

How should item 6229-024 and blower number 7701060014 be verified?

Match 6229-024 to the complete 7701060014 marking, then compare the 6229-024 plug, terminal count, mounting flange and wheel dimensions with the removed RENAULT unit.

Can 6229-024 have more than one vehicle-side blower configuration?

Yes. RENAULT production changes can affect 6229-024; confirm steering position, climate-control specification and the original 6229-024 geometry before approval.

What circuit checks are useful when 6229-024 does not operate?

For 6229-024, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6229-024 motor again.

Which details should accompany a wholesale request for 6229-024?

Provide item 6229-024, OE 7701060014, the stated application, quantity and destination; add 6229-024 carton or private-label requirements separately.

How can noise be avoided after fitting 6229-024?

Clear debris from the air inlet, check that the 6229-024 wheel turns freely, seat the 6229-024 flange evenly and keep wiring away from the impeller.

Request a quote for 6229-024: Send 7701060014, the 6229-024 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after installation.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country

Product classification

Cooling System

Vehicle systems

Cooling System

Cooling System. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Blower Motor

Part categories

Blower Motor

Blower Motor. Compare the product reference, vehicle specification, mounting position and source photographs, then request a quotation.

Frequently Asked Questions

What should I include in a quotation request?

Include the OE reference or SKU, vehicle make and model, production year, required side or position, quantity and delivery country.

How can I confirm the correct part?

Compare the OE reference, vehicle configuration, mounting points and connectors with the existing part. Send clear photographs if several versions are available.

Can I specify packing requirements?

Share your carton, label and mixed-order requirements with the quantity and destination. Packing and dispatch arrangements are confirmed before the order is finalized.