76982 Blower Motor for FORD Explorer

76982 Automotive Blower Motor Overview

This page records the pictured HVAC blower motor under OE reference 76982 for application-led sourcing.

For catalogue item 6203-128, Electrical input is converted into fan-wheel movement so the ventilation system can deliver air to face, floor and defrost ducts. Use 6203-128 when comparing this 76982 airflow configuration.

OE Reference and Application

The primary catalogue number is 76982 . The recorded application is FORD Explorer. For 6203-128, Measure the 76982 wheel height and outer diameter, then compare the electrical socket and base contour with the 76982 product photos. Record 6203-128 with the approved OE reference.

HVAC Interface and 76982 installation

During work on 6203-128, Clean leaves and debris from the HVAC inlet, inspect the cabin filter, and verify free wheel rotation after 76982 installation. Recheck 6203-128 before the lower trim is closed.

For item 6203-128, confirm that the 76982 centrifugal wheel clears its housing and that the 6203-128 connector lock engages without force. After seating 6203-128, test the available fan speeds and listen for rubbing, imbalance or intermittent electrical operation linked to 6203-128.

Automotive HVAC Blower Motor Specifications

Product type: Automotive HVAC Blower Motor

Primary OE reference: 76982

Cross-reference numbers: 6L2Z19805B / 75887

Vehicle brand: FORD

Vehicle model: Explorer

Model year: Confirm by OE reference

76982 installation area: Cabin HVAC / heater blower housing

Main interfaces: Electrical connector, mounting flange and centrifugal fan wheel

Fitment method: OE-number and physical-geometry comparison

Quality and Trade Supply

For product 6203-128, Reference labels and image records support traceable picking when visually similar blower motors share a shipment. The 6203-128 record remains the picking reference.

For trade item 6203-128, Each enquiry is easier to verify when it includes the part reference, vehicle context and clear images of the removed blower. Keep 6203-128 on the packing instruction.

Frequently Asked Questions

How should item 6203-128 and blower number 76982 be verified?

Match 6203-128 to the complete 76982 marking, then compare the 6203-128 plug, terminal count, mounting flange and wheel dimensions with the removed FORD unit.

Can 6203-128 have more than one vehicle-side blower configuration?

Yes. FORD production changes can affect 6203-128; confirm steering position, climate-control specification and the original 6203-128 geometry before approval.

What circuit checks are useful when 6203-128 does not operate?

For 6203-128, inspect the fuse, relay, speed resistor or controller, wiring and ground before replacing the 6203-128 motor again.

Which details should accompany a wholesale request for 6203-128?

Provide item 6203-128, OE 76982, the stated application, quantity and destination; add 6203-128 carton or private-label requirements separately.

How can noise be avoided after fitting 6203-128?

Clear debris from the air inlet, check that the 6203-128 wheel turns freely, seat the 6203-128 flange evenly and keep wiring away from the impeller.

Request a quote for 6203-128: Send 76982, the 6203-128 application and required quantity for a fitment and supply review.

Electrical match: Confirm voltage, plug key and terminal count against the original motor

Motor interface: Compare flange contour, screw spacing and motor-body depth

Fan wheel check: Verify wheel diameter, height and rotation direction before ordering

HVAC function: The blower works with the cabin filter and air doors to provide controlled ventilation in recirculation or fresh-air mode.

Installation guidance: Transfer only serviceable seals or hardware specified for the application and confirm the connector locks without force.

Fitment basis: Check voltage, rotation direction, cable exit and the position of every locating tab against the existing blower.

Quotation information: Provide the OE number, vehicle application, quantity and delivery country